Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Instrument adapter for brass instruments with a bell such as saxophone, trumpet, or trombone. Designed to be used with amplifier CMC 1 KV + microphone capsule MK-.
Includes two CMC 1 Colette Microphone Amplifiers with a matched set of your choice of MK capsule heads in a Pelican case.
High-quality acoustic foam windshield designed for microphones 19-22 mm in diameter from Deity, DPA, Schoeps, Sennheiser, and more.
High-quality acoustic foam windshield designed for microphones 24-25 mm in diameter from Schoeps, Sennheiser, and Sony.
Slide-on fur windscreen designed for shotgun microphones 19-22 mm in diameter from DPA, Schoeps, Sennheiser, and more.
Interchangeable microphone holder for using a Schoeps CMIT 5U with a Cinela Cosi windshield.
Fur windshield, cage, suspension, and XLR3 cable designed for the Schoeps CMIT 5U shotgun mic.
Extremely limited set including special black editions of a V4 Studio Microphone and a stereo pair of CMC 6 + MK 4 Cardioid Microphones in a handsome steel box.
Lightweight windshield for MS stereo pairs with built-in mount and XLR5 output cable designed for shotgun mics under 4.7".
Lightweight windshield for ORTF stereo pairs with built-in mount and XLR5 output cable.
Side-addressed figure-eight microphone with near-ideal consistency across the frequency range. Available with Lemo connector or fixed XLR cable.
Electrically passive capsule swivel fits between any capsule and microphone amp of the Colette modular system.
Compact mic body with with fixed right-cable and magnetic back mount for the Colette modular system. Available hardwired with XLR3M, Lemo3 for Sound Devices/Audio Limited, or Lemo3 for Zaxcom.
Cable box for use with an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE).
Includes CMC 1L amplifier, a mic capsule head of your choice, Lemo to XLR3M cable, and clamp.
Four-channel spot microphone for 3D audio recording.
Compact mic body with a gooseneck mount with Lemo3 output for use with Audio Limited A10 or Zaxcom ZMT pocket transmitters
Stereo microphone preamp body for use with matched cardioid MK 4 capsules to record using the ORTF technique.
Pop filter with a single layer of nylon for 20 mm microphones, including the CMC1 and CMC 6.
Pop filter with a dual layer of nylon for 20 mm microphones, including the CMC1 and CMC 6.
Nylon windscreen for 20 mm microphones, including the CMC1 and CMC 6.
Rough foam and rubber cover for dampening rain noise and leading away water from W 20 R1 Windshield Basket with Fur.
Stereo windshield kit with windshield, windjammer, and mount designed for matched pairs of Schoeps CCM or Sennheiser MKH 8000 mics. Connbox not included.
Stereo windshield kit with windshield, windjammer, and mount designed for s Schoeps CCM pair.
Lightweight windshield with built-in mount and XLR3 output cable designed for shotgun mics under 9.8".
Lightweight windshield with built-in mount and XLR3 output cable designed for shotgun mics under 8.3".
Compact mic body with a permanently attached 16' XLR3M cable for the Colette modular system.
Compact mic body with a Lemo output for the Colette modular system. Includes Lemo to XLR3M cable.
Mini OSIX mount with a built-in connector designed to be used with specific Schoeps or Sennheiser short shotgun capsules and a XLR3M output. (CCM RF version includes RF interference protection in the XLR3M.)
Includes CMC 1U amplifier, a mic capsule head of your choice, and T 20 table stand.
Table microphone with integrated supercardioid Capsule 41 head and 16' XLR3M cable.
Table microphone with integrated cardioid Capsule 4 head and 16' XLR3M cable.
Offers strong wind protection for Schoeps CMC and CCM series mics, as well as similarly sized omnidirectional shotguns.
Kit with windshield basket, suspension, and windjammer designed for the Schoeps CMC 1U.
Suitable for the Schoeps CMC 1U.
Contains Schoeps CMIT 5U Shotgun Microphone and HMa Plug-on Transmitter.
Includes CMC 1U amplifier, MK 41 supercardioid capsule, SG 20 stand clamp, and B5 popscreen.
Mount configured for specific microphones, but with swappable components (sold seperately). Soft models are for use with windscreens; hard models with zeppelins.
Fur windshield, cage, suspension, and XLR3 cable designed for the Schoeps CMC 1 and similarly-sized small shotgun mics.
Modular wide cardioid condenser microphone head. Requires a Schoeps Colette preamplifier (sold separately)
Modular omnidirectional condenser microphone head. Requires a Schoeps Colette preamplifier (sold separately)
Modular supercardioid condenser microphone head. Requires a Schoeps Colette preamplifier (sold separately)
Modular cardioid condenser microphone head. Requires a Schoeps Colette preamplifier (sold separately)
Compact mic body for the Colette modular system with characteristics equivalent to the CMC 6 at 1/3 the size.