Allows the MasterLockitPlus to provide Zeiss CP.3 lens metadata from the camera.
24" cable for connecting the ACN-Master Lockit to a Sound Devices 6-series USB port (or CL-12 keyboard port) for wireless control, time code, and metadata management. Requires USB A-B adapter.
23.6" 5-pin Lemo to right angled 5-pin Lemo time code cable.
9.8" 5-pin Lemo to RA 3.5 mm TRS coiled time code cable.
Bi-drectional cable for use with Ambient Controller and Sound Devices
For use with Ambient ATM216 TinyMike.
Low-loss coaxial cable.
Short XLR to Lemo cable for use with Schoeps CCM Lemo mics and Rycote Cyclone.
For Sound Devices 688, 664, 633, 552, 700 Series, 302, MixPre (v2), 442, MM1 (v2); Lectrosonics Quadpack; and Zaxcom Nomad & Maxx.
Connects Tentacle Time Code Generator to iOS device for recording time code or MovieSlate.
Cable to feed timecode from your Tentacle to any device that uses a 1/4" jack input connector.
Cable to connect Tentacle to GoPro 3/4 Cameras. Timecode on left channel, build-in mic signal on right channel.
Connects Tentacle with a Sound Devices 552 audio recorder.
Connects Tentacle to GoPro 3/4 cameras and allows simultaneous charging.
Cable to feed time code from a device that uses a 3-pin XLR output into Tentacle.
Converts the DIN 1.0/2.3 port on the UltraSync ONE into a BNC port.
Feeds mic level time code from the LTC port on the UltraSync One to any device that uses a 3.5mm input.
Feeds mic level time code from the LTC port on the UltraSync One to any device that uses a 3.5mm input, while also using an external 3.5mm mic source.
Takes time code out of the UltraSync One and feeds it to any device that accepts time codei n via 5-pin Lemo.
Feeds time code to the UltraSync One from any device that outputs time code from a 5-pin LEMO port.
Sync cable for use with DSLR cameras.
[email protected] (212) 629-9430[email protected] (404) 855-2255