Empty
Time code and microphone input cable for DSLR cameras with 3.55mm TRS jack.
15.75" time code cable.
19.5" cable for connecting the ACN-Master Lockit ACN port with the C-Link In of the Sound Devices 788T for wireless control, time code, and metadata management.
23.6" 5-pin Lemo to right angled 5-pin Lemo time code cable.
9.8" 5-pin Lemo to RA 3.5 mm TRS coiled time code cable.
23.6" 5-pin Lemo to 5-pin Lemo time code cable.
Bi-drectional cable for use with Ambient Controller and Sound Devices
For use with time code or antenna/RF connectors.
18" BNC to 1/8" tip sleeve.
Outputs time code from BNC to Lemo 5-pin. Unidirectional, 18".
Outputs time code from BNC to mini Lemo 4-pin for the Red Epic and Scarlet cameras. Unidirectional, 18".
Lemo 5-pin to separate XLR time code input and output connectors. 18".
18" bidirectional cable.
Outputs time code from Lemo 5-pin to 1/4" tip ring sleeve for Denecke slates. Unidirectional, 24".
Outputs time code from Lemo 5-pin to BNC. Unidirectional, 18".
Lemo 5-pin to separate BNC time code input and output connectors. 18".
Outputs time code from Lemo 5-pin to mini Lemo 4-pin for the Red Epic and Scarlet cameras. Unidirectional, 18".
Time code to camera jamming for Sound Devices 633, 664, and 688 production mixers.
For jamming time code to equipment with XLR connectors.
Connects Tentacle Time Code Generator to iOS device for recording time code or MovieSlate.
Bidirectional cable to feed time code from your Tentacle to any device that uses a BNC time code in/out connector and vice versa, featuring a 90° right angle BNC connector.
Cable to feed timecode from your Tentacle to any device that uses a 1/4" jack input connector.
Cable to connect Tentacle to GoPro 3/4 Cameras. Timecode on left channel, build-in mic signal on right channel.
Connects Tentacle Time Code Generator to another Tentacle or a DSLR.
Connects Tentacle Time Code Generator to RED Cameras, excluding RED One.
Cable to feed time code from your Tentacle to any device that uses a standard LEMO 5-pin connector.
Connects Tentacle with Alexa Mini camera.
Connects Tentacle with a Sound Devices 552 audio recorder.
Cable to feed time code from your Tentacle to any device that uses a standard XLR input connector.
Connects Tentacle to GoPro 3/4 cameras and allows simultaneous charging.
Cable to feed time code from a device that uses a standard 5-pin Lemo connector into Tentacle.
Cable to feed time code from a device that uses a 3-pin XLR output into Tentacle.
Converts the DIN 1.0/2.3 port on the UltraSync ONE into a BNC port.
Feeds mic level time code from the LTC port on the UltraSync One to any device that uses a 3.5mm input.
Feeds mic level time code from the LTC port on the UltraSync One to any device that uses a 3.5mm input, while also using an external 3.5mm mic source.
Takes time code out of the UltraSync One and feeds it to any device that accepts time codei n via 5-pin Lemo.
Feeds mic level time code from the LTC port on the UltraSync One to any device that uses a 3-pin XLR input.
DIN 1.0/2.3 coax time code or genlock cable for use with the UltraSync One.
Feeds time code to the UltraSync One from any device that outputs time code from a 5-pin LEMO port.
Connects the ARRI Alexa for time code and ethernet connectivity.
Interface cable for connecting the :wave to a Sound Devices 6-series USB port (or CL-12 keyboard port) for wireless control, time code, and metadata management.
Interface cable for connecting the :wave to a Sound Devices CL-12 for wireless control, time code, and metadata management.
Sync cable for use with DSLR cameras.
