14V intelligent battery which generates performance data readable by Aaton's other products.
Simultaneously charges two lithium ion batteries or acts as a power supply for the Cantar X3.
For 1-12 Micro AAA / Mignon AA, 1-6 Baby C / Mono D and 1-2 9V Block NiCd/NiMH rechargeable batteries. Includes automatic refreshing function and 2 USB charging sockets.
For 1-6 Micro AAA / Mignon AA, 1-4 Baby C / Mono D, 1-2 9V Block NiCd/NiMH rechargeable batteries. Includes automatic refreshing function.
Compatible with AAA,AA,C,D and 9V rechargeable and alkaline batteries.
Universal battery tester for AAA, AA, C, D, 9V, CR123A, button cells batteries, and more.
Allow adaptation of a PowerTap connector for 12 VDC on-camera light.
Distributes antenna signal and power to up to six diversity receivers.
For use with the Zaxcom RX900, QRX100, QRX200, and QRX235 receivers.
24″ straight cable with eSMART battery cap to Hirose 4-pin connector
Lithium ion portable smart battery charger.
Small, lightweight smart 14.4 V lithium ion battery with the Inspired Energy contact configuration.
Six Hirose output connectors, built-in eSmart adapter, and fuel gauge for battery info.
Eight Hirose output connectors and fuel gauge for battery info. Usable with SLA, NI-MH and Li-Ion batteries.
Eight Hirose output connectors, power regulator, and fuel gauge for battery info. Usable with SLA, NI-MH and Li-Ion batteries.
Four Switchcraft output connectors and a serial output for optional fuel gauge.
For use with an eSMART series lithium battery.
16 direct DC power outputs ( 12x Hirose, 4x XLR) and 4x USB 5V ground isolated outputs.
Four bay desktop smart battery simultaneous charger with active thermal management
Ultra-small DC power distribution box with 6 protected outputs and an integrated DC voltmeter designed for ENG sound bags.
Five Hirose 4-pin outputs.
Five Hirose 4-pin outputs and USB charging port.
Replacement belt clip for Denecke power supplies.
1000 mA 9V.
High Performance Lithium Ion Batteries for High tech Devices
Charges two GoPro Li-Ion batteries simultaneously.
1220mAh lithium-ion rechargeable battery.
18" cable for powering Zaxcom RX, QRX, and Mixplexer units from a BDS.
Features a Hirose power output cable and four auxiliary Hirose sockets.
Charges all NP-Style Li-ion, Ni-MH and Ni-Cd batteries.
Includes 2x IDX NP batteries with charger, PowerStar Mini, NP Cup, and 2x power output cables.
Includes 4x IDX NP batteries with charger. PowerStar Mini Triple Play, NP Cup, and 4x power output cables.
Includes two IDX NP-Style Lithium Ion Batteries and one PowerStar Mini NP-Cup (Hirose or TA4F connector).
Includes two NP-L7S batteries and one JL-2PLUS charger
Charges two Sony "L" series batteries, such as those used in Sound Devices, simultaneously.
Small, lightweight smart battery with the Inspired Energy contact configuration.
For Li-Polymer, Li-ion , Ni-MH, and Ni-CD (9.6V, 8.4V & 7.2V) batteries.
Includes eight iPower Li-Polymer Batteries and the DC 9V Battery Fast Smart Charger
Supplies 48V Phantom Power from a DC IN 9 - 16V Hirose connection.
Used to apply DC power to a coaxial antenna line for remotely powering the UFM230 filter/amp.
General purpose AC adapter capable of 120 VAC and 12 VDC.
Rechargeable 3.6V 1000mAh LB-50 spare battery for six hours of SSM operation.
For use with an NO-50 or compatible lithium ion rechargeable battery.
Replaces an NP-1 battery with AC power.
1.2V, 2700mAh NiMH batteries.
1.2V, 1000 mAh NiMH batteries.
Universal 4 pin power supply for the ULN-2 and ULN-8.
Adapter box with 48V phantom power, two XLR inputs, and a TA5 output.
Miniature 48V power supply.
Portable power bank with dual USB output for charging digital devices.
For use with Phonak invisty, Comtek, and other in-ear receivers.
Charges up to 4 AA or AAA nickel-metal hydride (NiMH) or nickel-cadmium (NiCD) batteries.
16 bay battery charging dock.
10 amp DC power distro suitable for powering a small cart with AC power or external battery.
Battery cup with 4-pin Hirose connector compatible with NP-1 batteries.
Redesigned with integrated charging port, SpeakON and 4-pin XLR outputs, dual LED volt & current meters, and protection reset button.
Compact battery charger for use with new-style PSC Pelican LiFE batteries.
Compact battery charger for use with older PSC Pelican LiFE batteries.
Dual right angle BDS power cable for the PSC PowerStar Mini and Triple Play power distribution boxes.
The quietest, simplest, and most efficient power supply for a cart-based setup.
Small and compact power distribution unit. Switchcraft coaxial BDS output. 4-pin Mini XLR input.
Simultaneously use up to 3 batteries via switchable inputs. Standard USB and Switchcraft coaxial output. 4-pin Mini XLR input.
Battery cup with TA4F connector compatible with NP-1 batteries.
AC power supply for PowerStar Mini and Triple Play power distribution boxes.
Right angle BDS power cable for the PSC PowerStar Mini and Triple Play power distribution boxes.
PSC's most powerful rechargeable power system. Provides clean, reliable, quiet DC power.
2' BDS output cable, optimized for use with iOS devices.
4" BDS input cable.
1 power input, 5 switchable outputs and 1 (selectable) non-switched output. Remote meter port not included.
1 power input, 5 switchable outputs, 1 (selectable) output and 1 USB output. Remote meter port included.
Adapts two NP-1 Battery for use with a TA4F power input. 18".
Hi-Q battery input cable for BDS.
For use with Remote Audio Hi-Q smart batteries.
1 in, 5 out on XLR4s, circuit protected power distribution box, 6A max for each output, 24A max total.
For use with the MEON LiFe. Single rackspace. Includes removable mounting ears, and 4-pin power cable. 20 Amp-hour capacity.
Includes removable mounting ears, an illuminated voltmeter, and two 5V USB output jacks.
Compatible with Lectrosonics 100, 200, 400 series & BattElim, Remote Audio SPEAKEASY, Sound Devices MM-1 & HX-3, Shure FP32/33. Fostex FR2-LE, etc. 24"
For PSC M3, AlphaMix, M4mkll, Wendt X5, Sound Devices HX-3, MM1, and second generation of MixPre& 442.
Adapts a NP-1 Battery for use with a TA4F power input. 18".
Compact volt meter, amp meter, and ON/OFF controller for use with Remote Audio power distribution boxes.
Power adapter for external powering Sennheiser G3 receivers. Available wired for Hirose4, BDS, or unterminated.
Two-bay docking station for charging wireless transmitters.
AC wall mount power supply for the MixPre-3 and MixPre-6 recorders with USB-C connector and adapter plugs.
AC power supply for the MD-4 Dante Interface and 970, PIX 260i, PIX 250i and PIX 270i.
Powers the 552, 633, 664, 688, MixPre-D, PIX 220(i), PIX 240(i), and all 7 Series recorders through a Hirose 4-pin connector.
No need to be distracted by battery levels anymore with this Sony L-Type 7.2V, 6600mAH spare battery for 7-Series audio recorders and PIX video recorders
For 7-Series audio recorders. Sony L-compatible mount.
For use with Lectrosonics 100, 200, 400 series receivers and ISO9VOLT battery eliminator.
Works with MD-USB, Zaxcom Stereoline, RX900, QRX100/200, Mic Plexer, Sound Devices MixPre (v1), and 442 (v1).
Works with Inspired Energy, Audioroot, and Remote Audio's Hi-Q batteries.
Mini ENG distribution box with 5 switched power outputs, 1 selectable output, 1 USB output, and 1 power input.
For use with Zaxcom Nomad, Maxx, RX-12, Sound Devices 5, 6, and7 series, 302, MixPre (v2), 442, Lectrosonics Octopack, Quadpack, and more.
1200mAH 9V battery
Powers a PIX-E5, PIX-E5H or PIX-E7 monitor from a Anton Bauer camera battery.
AC power adapter designed for use with the Zoom H4n, R16, R24, Q3 or Q3HD.
[email protected] (212) 629-9430[email protected] (404) 855-2255