Please check the item status before ordering or contact us if you need something in a timely manner.
Close Announcement
Empty
Set of two microphone extenders for Axient and UHFR wireless handheld transmitters to accommodate a mic flag
Set of two extenders (3 and 4.5 cm) compatible with current Sennheiser handheld transmitters to allow mic flag or large custom windshield use.
Lightweight waterproof foam rain cover for Cinela's Piano windshield.
Sphere shaped passive processor available in three sizes with different acoustic boosts. Designed for use with the DPA 4006A omnidirectional microphone.
Microphone preamplifier body with low cut and high boost filters and XLRM connector for d:dicate series capsules .
Compact microphone preamplifier body with XLRM connector for d:dicate series capsules.
Converts DPA lavalier wired for Microdot adapter to specified wireless transmitter. Select tx make/model from dropdown.
Screws into a mic stand or boom pole to reduce the amount of low frequencies traveling to your suspension
Comfortable foam-covered graphite grip with internal cabling and threaded 3/8" base.
Turns an omnidirectional lav into a long range (~30') mic.
Turns an omnidirectional lav into a long range (250'-300') mic.
Turns an omnidirectional lav into a long range (500'-600') mic. Thinner and lighter dish than the KM-26.
Turns an omnidirectional lav into a long range (500'-600') mic.
Replacement ear cushion for M142 and M152 headset microphones.
Prevents Lectrosonics HH series transmitters from rolling.
Replacement HF peak cap for the HM172 Earset.
Small (5.7" x4.72" x 1.57") accessory pouch with three sleeves for capsules, cards, and other small items.
1/8" (3.5mm) threaded adapter allows the Lav Snake to be used with mics wired for Sennheiser Evolution and Sony transmitters.
Softens the impact of rain drops. Designed for use with specific Rycote Windshield Kits.
Additional water protection for the Rainman Raincover.
Diffuses rain droplets to minimize rain noise.
Quick release/attachment system for mounting a 3/8" threaded mount on a flat surface with screws (not included).
Pop filter with a single layer of nylon for 20 mm microphones, including the CMC1 and CMC 6.
Pop filter with a dual layer of nylon for 20 mm microphones, including the CMC1 and CMC 6.
Active cut filter with a rolloff of 24dB/octave at 60Hz. For use with a Schoeps CMC or MK-41 microphone
Electrically passive capsule swivel fits between any capsule and microphone amp of the Colette modular system.
Flexible OEM parabolic dish for use with Schoeps CCM Parabolic Dish Sets. Does not include microphone, windscreen, or handle.
Rough foam and rubber cover for dampening rain noise and leading away water from W 20 R1 Windshield Basket with Fur.
Microphone insert for Axient and UHFR wireless handheld transmitters.
