Please check the item status before ordering or contact us if you need something in a timely manner.
Screw-on adaptor for threaded 1/8" jacks.
XLR to lavalier adaptor for microphones wired for Sennheiser SK (2-wire only), Lectrosonics SSM, Audio Ltd., Zaxcom TRX, Wisycom MTP (2-wire only)
Time code and microphone input cable for DSLR cameras with 3.55mm TRS jack.
15.75" time code cable.
Phantom 48 volts/electret converter with 3.5 mm jack.
Phantom 48 volts/electret converter with TA5M connector.
Waterproof connector to XLR3M adapter cable for use with the ASF-1 Sound Fish Hydrophone.
23.6" 5-pin Lemo to 5-pin Lemo cable.
15.7" 5-pin Lemo to right-angle BNC cable.
15.7" 5-pin Lemo to 4-pin Lemo cable for use with Red cameras or expanders with 4-pin SYNC port.
9.8" 5-pin Lemo to right-angle 3.5 mm (1/8") TRS coiled cable.
23.6" 5-pin Lemo to right angled 5-pin Lemo cable.
23.6" 5-pin Lemo to 3-pin XLRM cable.
Metadata interface cable for connecting the Lockit+ to camera lenses with the Cooke /i protocol.
Allows the MasterLockitPlus to provide Zeiss CP.3 lens metadata from the camera.
Set of two extenders (3 and 4.5 cm) compatible with current Sennheiser handheld transmitters to allow mic flag or large custom windshield use.
19.5" cable for connecting the ACN-Master Lockit ACN port with the C-Link In of the Sound Devices 788T for wireless control, time code, and metadata management.
24" cable for connecting the ACN-Master Lockit to a Sound Devices 6-series USB port (or CL-12 keyboard port) for wireless control, time code, and metadata management. Requires USB A-B adapter.
Shorty right-angle XLR to right-angle XLR for use with the QAPL-TX Plug-On Transmitter Mount for Boom Poles.
15" right-angle XLRF to XLRM thin cable with boom pole mount for XLR cable or plug-on transmitter.
For use with Ambient ATM216 TinyMike.
6" power output cable for UMP-II/UMP-III universal mic power supply. TA3F to selected connector.
9.8" Neutrik seven-pin XLRF to three three-pin Neutrik XLRMs adapter cable.
Allow adaptation of a PowerTap connector for 12 VDC on-camera light.
Feeds mic level time code from the LTC port on the UltraSync One to any device that uses a 3.5mm input.
DIN 1.0/2.3 coax time code or genlock cable for use with the UltraSync One.
Chip which reduces unwanted RF signals by -40dB when soldered into a straight 3-pin XLRF connector.
Chip which reduces unwanted RF signals by -40dB when soldered into a Cable Techniques low-profile side exit XLRF connector.
BNC to three-pin lemo cable for connecting external time code sources to the A10-TX.
[email protected] (212) 629-9430[email protected] (404) 855-2255