Empty
Factory upgrade for PSC RF Six Pack to integrate receivers with Cantar X3/Mini.
Provides telemetry, and remote control from the Cantar X3 or Mini for up to eight SuperSlot receivers. Features XLR or TA3 audio outputs.
Integrates wireless receivers into the Cantar X3 and/or CantarMini UI with support for Audio LTD A10-RX, Lectrosonics SRb & SRc, Sennheiser EK-6042, and Wisycom MCR42.
Internal board for Lectrosonics Octopack to integrate receivers with Cantar X3/Mini.
SuperSlot receiver socket with sub-D25 connector for use with the Aaton Hydra integration system. Available with (2) XLR3M or (2) TA3 audio outputs.
Wireless 2-channel receiver slot for use with the ARRI Amira camera. Available for Anton Bauer and V-Slot.
Attaches to an A10 Receiver to change the orientation when inserted into an SL-6 or A10-Rack
Digital wideband transmitter with simultaneous recording and transmitting for balanced mics and line-level inputs.
Digital wideband receiver with dual XLR input and Hirose4 power cable.
Digital wideband receiver with D‐sub connector for universal and SuperSlot.
Replacement mounting plate for A10 Receiver with Universal/SuperSlot adapter.
25 Pin D-Type Universal/Superslot end plate for the A10-RX.
End plate for A10-RX with dual XLR inputs and Hirose4 power connection.
Replacement belt clip for A10 bodypack transmitter.
Protective neoprene case for the A10-TX.
Antenna with SMA connector for A10-RX and A10-TX.
Four-slot, eight-channel, Dante-enabled wireless enclosure compatible with most unislot and SuperSlot receivers.
Converts an A10-RX receiver into a two channel headphone monitor.
Required to use the DX1010 in SuperSlot, Panasonic Unislot, and Ambient PowerSlot and VSLOT slots.
Distributes antenna signal and power to up to four diversity receivers.
Distributes antenna signal and power to up to six diversity receivers.
Three=mode log periodic dipole array which operates over the 470-718 MHz range.
Digital 2.4 GHz wireless system with bodypack transmitter, lavalier, and bodypack receiver.
Digital 2.4 GHz wireless system with handheld transmitter and bodypack receiver.
Aluminum mounting bracket for the Lectrosonics UCR-195, 200, 205, 211, or 411.
Aluminum mounting bracket for Zaxcom wireless receivers.
Aluminum mounting bracket for Zaxcom RX200 wireless receiver.
Compact omnidirectional antenna designed for use on a sound bag.
Antenna with -9 to 18 dB adjustable gain, designed for non-line-of-sight situations.
Compact portable rack system for Audio Ltd. En2 receivers with power distribution and ultra-low noise signal filtering.
Adapts a Lemo 3-pin lavalier connector (e.g. older Sennheiser wireless, Zaxcom, and Wisycom tx) to 3.5mm (1/8") for use with the Sennheiser G3 and AVX tx.
Fits one or two Sharkie Shark Fin Antennas.
Log Periodic Dipole Array active antenna with adjustable gain (-9 to + 18 dB) and extremely low noise.
Provides power and RF for six diversity receivers.
Provides power and RF for three diversity receivers.
Portable wireless field transmitter with BNC RF output for use with PR-216 wireless receivers.
For use with BST 75-216, BST-25/216 and M-216 Option 7 Transmitters in the 216-217 MHz band. Ideal for use on sound carts for location sound.
High-gain antenna
Rugged and versatile frequency synthesized personal receiver operating in the 216-217 MHz band. Compatible with the M-216, M-216 Option 1, M-216 Option P7, BST-25/216, and BST 75-216 transmitters. Includes P-11 storage pouch and BC-216 belt clip.
Belt clip for Comtek portable transmitters and receivers.
Two-channel digital diversity 2.4GHz wireless kit with selectable RF power. Includes a belt pack transmitter, plug-on transmitter, dual receiver, lavaliers, cables, and mounts.
Converts a lavalier's Microdot connector for use with transmitter or recorder input jacks. Available in 1/8" (3.5mm), TA4F, and TA5F.
Two-channel digital diversity 2.4GHz wireless kit with selectable RF power. Includes two beltpack transmitters, dual receiver, lavaliers, cables, and mounts.
2.4 GHz transmitter with recorder capability, selectable 10, 25, 50 and 100 mW RF power, and XLR and 3.5mm Mic/Line inputs for either plug-on or pocket recorder use.
