Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Full duplex portable VHF/UHF/940 MHz transceiver unit designed for news with two outputs, main and AUX inputs.
Rounded rubber foam bumper suitable for any modern (post-1997) 6-section VdB boom pole.
Rounded rubber foam bumper suitable for any older (pre-1997) 5-section VdB boom pole.
Houses up to 12 channels of wideband audio receivers, with built-in scanner and remote control software for your Zaxcom transmitters. Receiver modules sold separately.
Cover for the receiver slot in a Zaxcom RX-12 or RX-12R multi-coupler.
Converts a Zaxcom MRX214 or MRX414 receiver modules into stand-alone receivers.
Extremely small eight-channel receiver interface which can accept audio from up to eight separate transmitters,
Extremely small eight-channel receiver interface with Dante which can accept audio from up to eight separate transmitters and send up to sixteen channels.
Affordable single slot wideband receiver with antenna diversity in the 500MHz to 700MHz range.
Small, lightweight 95 wH smart battery with the Inspired Energy contact configuration.
6-Section (1'8-6'11") carbon fiber pole with quarter-turn locking collars. Available uncabled or with an internal coiled cable (bottom exit).
SDXC UHS-II card (100MB/s) approved for use with Sound Devices MixPre, 6-series, and 8-series recorders.
Features a display. TCXO crystal, and is 23.976 HD compatible.
Generates, reads, and jams trilevel sync. Available with LEMO.
For use with the Shure P3RA, P9RA, PSM1000, UR5, QLX-D, and ULX-D wireless systems.
Charges two SB900A rechargeable batteries. Requires SBC or SBRC charging housing (sold separately).
Charges two SB900A, UR5, P3RA, P9RA, P10R, or QLX-D/ULX-D Digital Wireless Systems batteries.
Charges eight SB900A, PSM900, PSM1000, UR5 Portable Diversity Receiver, or ULX-D Digital Wireless Systems batteries.
AC-powerd standalone charging housing for the SBM910, SBM920, SBM910M, and SBC-AX battery charging modules. Modules sold separately.
THIS ITEM HAS BEEN REPLACED BY THE SBOX-1N. Compact, self powered solution for reading/generating/jamming of SMPTE time code of all common frame rates 23.976 – 30 drop frame and non drop frame formats.
Hot shoe mount for mounting the SBOX-1N on a camera.
Protects the SBOX-1N while maintaining usability in-pouch.
Accurate and compact time code and word clock generator with RF time code and status transmission.
Charges up to eight Shure rechargeable bodypack and handheld transmitter batteries (AXT910, AXT920, or SB900A) in a single rack space. Requires charging modules (sold separately.)
Compact condenser microphone with a virtually flat frequency response from 70Hz-20KHz.
Simple 18-in, 20-out rack-moutable USB audio interface.
Simple and compact 18-in, 8-out USB audio interface.
Simple and compact 2-in, 2-out USB audio interface with microphone, headphones, and all the cables needed to start recording.
Simple and compact 2-in, 2-out USB audio interface.
Simple and compact 4-in, 4-out USB audio interface.
Simple and compact 8-in, 6-out USB audio interface.
Eight-channel mic pre with A-D/D-A conversion and analog compression.
Simple and compact 2-in (1 mic and 1 line), 2-out USB audio interface with microphone, headphones, and all the cables needed to start recording.
Simple and compact 2-in (1 mic and 1 line), 2-out USB audio interface.
Lightweight IFB headphones with 40mm drivers, and 1/8" (3.5mm) connector.
Set of 20 replacement leatherette ear pads for the Halter Technical Scene Monitor 2.
With logic control and EQ per channel, AC only. Half rack space, single and dual Mount.
With logic control and EQ per channel, AC only. One rack space, rack mount ready.
Mixer/recorder with 16 mic/line preamplifiers, 32 channels of Dante, 36 record tracks, AES in and out, and 12 analog outputs.
32 channel, 36 track portable time code mixer-recorder with Orca Audio Bag, two 64 GB SD cards, two batteries, and input, power, and time code cables.
Surveillance earbud with 12" coiled cord.
Adjustment tool (or tweaker) for setting transmitter gain, roll-off pots, and frequency switches.
Clipboard with articulating arm for use with Soundcart carts.
Performs the functions of a low-voltage disconnect monitor, a DC-DC converter, and a DC distribution panel in one convenient unit.