Twelve soft foam mounts for DPA 6060, Sennheiser MKE 1, Countryman B6, and Sanken COS-11 lavaliers.
Comfortable form-fitting shorts with three built-in transmitter pouches designed to hide under skirts and leotards. Available in small or medium and in black or beige.
Lightweight strap that stretches up to 50" and can be cut down for smaller waists. Available in beige and black. Pouches sold separately.
Mimics the structure of the human head to record an immersive binaural listening experience.
Sturdy boom cradle which attaches to almost any shoulder strap.
Eight-track time code recorder with six inputs, mixer, and USB audio interface. Includes K-Tek Stingray MixPro Bag and SD card.
Six space rackmount for PSC EuroCart.
Six space rackmount for original PSC Sound Cart
Yagi-style antenna for Lectrosonics Block 941 receivers.
Extra-extra small audio bag to hold the Sound Devices MixPre-3/6 with an MX-L battery mount.
For use over the foam windscreen of the Deity V-Mic D3, Rode VideoMic and NTG1, and similarly-sized microphones.
Attaches to an A10 Receiver to change the orientation when inserted into an SL-6 or A10-Rack
Set of six soft pliable mounts for DPA 4071 lavaliers.
Set of six soft pliable mounts for DPA 4060/4061/4062/4063 lavaliers.
Low voltage switch with four 4 802.3at PoE ports, 1 non-PoE port, and a versatile DC power input.
Virtually connects USB devices over a network.
Ultra-small (2.4" x 1.6" x 0.7") transmitter with up to 12 hours of battery life and selectable 15 mW/3.5mW output power.
Comfortable and compact earphones designed for transparent mids and clear highs with a 7mm driver.
Comfortable and compact entry-level earphones designed for precise sound with a 10mm driver.
Comfortable and compact earphones designed for detailed, high resolution sound with a 7mm driver.
0.5" x 3" Rectangular clear double-sided tack-tape strips.
Wired with Lemo 3 pin for Audio Limited A10 transmitters.. Includes tie clip, rubber mount, and windscreen. Available in black, white, and beige.
Soft pliable mount for the DPA 4071 lavalier.
Soft pliable mount for the DPA 4060/4061/4062/4063 lavalier.
Spare rubber bottom for PSC Elite boom poles.
Phantom powered ribbon and dynamic microphone amplifier and impedance buffer.
Multi-slot housing with direct interface for Aaton Cantar/Mini. Provides RF and power distro for three slot-compatible wireless receivers such as Lectrosonics SR series, Wisycom MCR42S, and Sennheiser EK 6042. Available as Single Band or Dual Band models.
Switchable active/passive antenna with coverage from 470 to 618 MHz and 941 to 960 MHz.
Comfortable, versatile hip pack with two large main compartments, several small pockets, and removable thigh-strap.
Multi-format intelligent SDI monitoring with two adjustable screens.
Features ZHD digital modulation, significantly enhancing range and distance, and included QIFB for wireless time code.
High-performance active/passive UHF directional antenna with built-in RF amplifier, adjustable RF gain, and active filter bandwidth from 470 to 700 MHz.
Closed-back headphones with extended low-frequency response and high-frequency response.
Semi-open professional studio headphones with solid low end, accurate mids, and crystal-clear highs.
Transparent modular omnidirectional condenser microphone capsule for use with DPA d:dicate series. Requires a DPA MMP series preamplifier (sold separately).
Sphere shaped passive processor available in three sizes with different acoustic boosts. Designed for use with the DPA 4006A omnidirectional microphone.
Transparent omnidirectional 4006 capsule head with compact MMP-C preamp.
Portable RF spectrum analyzer designed for use with wireless microphones and in-ear monitor systems.
Converts an A10-RX receiver into a two channel headphone monitor.
Chip which reduces unwanted RF signals by -40dB when soldered into a straight 3-pin XLRF connector.
16" 3-pin XLRF to 3-pin Lemo cable with built-in filter to reduce unwanted RF signal by -40dB.
Simple and compact 2-in, 4-out USB audio interface.
Mount for lavalier microphone cables 1-2mm in diameter.
Lightweight closed-back professional headphones with clear, extended highs and warm bass.
Closed-back professional studio headphones with accurate audio across an extended range for recording.
Open-back professional headphones with individually matched drivers for smooth, extended highs and accurate bass.
Includes four drivers, inline playback and volume controls, and the ability to connect via either a detachable cable with 3,5mm connector. or Bluetooth wireless. Available in black, blue, bronze, and clear.
[email protected] (212) 629-9430[email protected] (404) 855-2255