The ZMT3-X Transmitter is a larger version of the ZMT3 with increased battery life and durability, while retaining the standard ZMT3 features including simultaneous transmission and internal recording with time code, encrypted audio, ZHD modulation, ZaxNet remote control, and NeverClip. It has two Microdot inputs so it can tramsit input from two seperate lavaliers at the same time.
The ZMT3-X uses a larger Motorola BT100 battery for up to 12 hours of runtime and 48 hours of standby time on a single charge. It's designed with tough nylon polymer and rubber materials for even better protection against shocks, bumps, and drops.
In addition to durability and battery life, the ZMT3-X is packed full of features you'd expect from a Zaxcom transmitter. The ZMT3-X is fully ZaxNet™ compatible, allowing for remote time code jamming, frequency changing, input gain adjustment, and power output mode.
The ZMT3-X is also capable of simultaneous transmission to a QRX receiver and recording to an internal SD card for an immediate backup file. If you're recording in an area of crowded spectrum, the ZMT3-X can turn on ZHD modulation, to increase the number of channels in a single MHz of bandwidth up to nine, to make more space for your transmissions when available frequencies are at a premium.
The two Microdot inputs can accept up to two lavaliers. Both microphones can transmit at the same time in stereo mode for double-miking talent with a single transmitter or just one microphone in mono mode. Zaxcom's internal recording system can record from the microphones whether the transmitter is transmitting or not.
If security is a concern on your production, the ZMT3-X encrypts its audio signals while transmitting so they can't be picked up by a third party.
Some versions of this wireless microphone device may operate in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC’s wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
[email protected] (212) 629-9430[email protected] (404) 855-2255