The Zaxcom ZMT miniature wideband transmitter is extremely lightweight and compact, weighing in at approximately 1.5" x 2.3" x 0.5" (about the size of a Zippo lighter) and 2.2 oz. Despite its incredibly low profile, it requires almost no compromises, sharing most of the features of its larger siblings, including built-in backup recording with time code, NeverClip™ for superior dynamic range, full encrytion, and Zaxcom High Density (ZHD) modulation.
New to the ZMT is the capability to output audio or time code for jamming through the mic connector, an A-D converter with a 108 dB dynamic range (~5dB wider than previous models), and a removable screw on top to allow for mounting or hanging. A standard rechargable Fuji NP-50 or compatible battery (sold seperately) will power the unit for up to five and a half hours (at 50mW w/o PowerRoll).
ZHD modulation allows for up to 10 channels of wireless to be operated in one MHz of frequency spectrum space. The wireless signal is only 50 KHz wide and can be spaced as close as 100 KHz channel to channel allowing up to sixty channels of ZHD wireless in a single 6 MHz American television channel. The new modulation is ultra efficient resulting in incredible transmission range.
The ZHD transmitters are capable of running all existing mono Zaxcom modulations maintaining compatibility with all currently produced Zaxcom receivers. ZHD modulation conforms to all currently proposed FCC regulations for spectrally efficient wireless transmission.
Channel spacing varies based on the receiver you pair it with:
The ZMT3.5 covers blocks 20 through 23 (512-614MHz) and the ZMT3.6 covers blocks 23 through 26 (596 – 698 MHz). It’s lightweight, water resistant, and durable, housed in a high strength, impact resistant nylon polymer casing. It's designed efficiently for an extremely low heat output.
The ZMT utilizes Zaxcom’s battery saving feature PowerRoll™ to automatically adjusts the transmitter output power based on the record status as sent via ZaxNet boosting the output power level up while rolling and powering down while on standby.
The ZMT works with ZaxNet, Zaxcom’s 2.4-GHz RF network that distributes remote control commands, time code and IFB audio. With ZaxNet, you can remotely control transmitter settings such as gain, frequency channel selection, transport controls and output power levels. When paired with an IFB100/200 and Deva or Fusion, the units can also replay audio via a time code reference giving production sound mixers the ability to replay and remix audio, creating a virtual multi-track playback and re-record system.
The ZMT sends a Quality Control audio signal over ZaxNet so you can use an ERX to listen to a lavalier right on the spot without returning to the cart.
For lots more detail, here's Glenn Sanders and Peter Schneider going on a super-deep dive through the feature set:
CONSUMER ALERT: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website atwww.fcc.gov/cgb/wirelessmicrophones.
Some versions of this wireless microphone device may operate in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC’s wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
[email protected] (212) 629-9430[email protected] (404) 855-2255