Beatrice W4 Four-Channel Wall Intercom

Model:

Beatrice W4

Price:	$840.00

Features

Dante / AES67 integrated
PoE powered
Internal microphone or external XLR mic input
Four configurable talk buttons
Flush desk or wall mounting

Description

Overview

The Beatrice W4 is a four-channel interface allowing two-way communications with the Beatrice intercom system. It is designed to mount flush to the surface in a wall or a desk.

Connectivity for the Beatrice W4 is via a single Cat5/Cat6 cable which carries audio and also powers the unit via PoE for extremely simple installation.

There is an adjustable internal loudspeaker to monitor the incoming audio, an internal microphone, and an XLR input for connecting an external mic.

Four talk switches route the selected microphone onto the Dante/AES67 network, either as a momentary push-to-talk or a latching connection. A double tap of the talk key sends a call function to another Beatrice device. Incoming call notification is displayed on the LED and with an optional audio alert.

All settings are accessible via the configuration screen, including a party line mode where the input is looped directly to the output.

Audio routing to and from other devices is set-up using a Dante controller. Dante controller allows for point to multipoint routing on outgoing circuits (but only a single incoming circuit for each of the four channels). An built-in partyline allows any of the four incoming circuits to be routed to any of the four output circuits, making both simple partyline and more complex group circuits possible.

Specifications

<NETWORK/ Dante Interface></NETWORK/ Dante Interface> <Physical Interface>1 of RJ45 Neutrik Ethercon</Physical Interface> <Audio Sample Frequency>48kS/s</Audio Sample Frequency> <Transfer Rate>100Mbps</Transfer Rate> <Dante Chipset>Ultimo UXT-01-004 (NoteUltimo UXT-01-004 (Note: Audinate recommends no more than 10 Ultimo chipsets on one network UNLESS another Dante device such as the Brooklyn Module found in eight-channel Beatrice / Dark units, is on the same network)</Dante Chipset> <Audinate Ultimo Chipset>AES67 compliant</Audinate Ultimo Chipset> <></> <AUDIO></AUDIO> <Mic Gain Range>+60 to +20dB</Mic Gain Range> <Line Input Gain Range>+10 to -20dB</Line Input Gain Range> <Phantom Power>12 Volts</Phantom Power> <Equivalent Input Noise>-110dB (20Hz to 20kHz A weighted 300 Ohms)</Equivalent Input Noise> <Headphone Impedance>32 - 1000 Ohms</Headphone Impedance> <Max Headphone Output Level>+10dB into 600 Ohms</Max Headphone Output Level> <Headphone Connector>6.35mm (1/4") TRS socket, can be safely connected to TS mono jack plug</Headphone Connector> <Band Pass Filter>50Hz to 15kHz</Band Pass Filter> <Loudspeaker Drive Unit>8cm (3.3") full range, high efficiency, 10 watt, 130 to 20000Hz</Loudspeaker Drive Unit> <></> <CALL CIRCUIT></CALL CIRCUIT> <Inband Calling Frequency>20kHz</Inband Calling Frequency> <Amplitude>-20dBFs</Amplitude> <Duration Of Signal>2 seconds</Duration Of Signal> <Compatibility>All Glensound Beatrice units and Studio Technologies units</Compatibility> <></> <ENVIRONMENTAL></ENVIRONMENTAL> <Operating Temperature>0 to +50°C (32 to 122°F)</Operating Temperature> <Storage Temperature>-20 to +70°C (-4 to 158°F)</Storage Temperature> <Relative Humidity>0 to 95% non-condensing</Relative Humidity>

In the Box

Review

Add new comment

Buy/Rent

Buy

Product:

Add to Wishlist

Rent

Price:

$0.00/billing day

Please note that rental items will be provided from available frequency and color options. If you have a preference or requirement, please indicate it in order comments.

# of billing days subject to duration.
Week = 3 billing days/week
3 Weeks or more = 2 billing days/week