Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Powers the 552, 633, 664, 688, MixPre-D, PIX 220(i), PIX 240(i), and all 7 Series recorders through a Hirose 4-pin connector.
Converts an unbalanced line, instrument or speaker level signal to low impedance balanced mic level.
Converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.
Combines two line-level signals into one line level output.
For 552, 664, MixPre, MixPre-D, or MP-2 tape output to 442/302 mix in.
Velcro-flap storage pouch with belt loop for the PR-216 and other Comtek transmitters and receivers.
Self tuning IFB receiver.
Sticker-backed foam for padding shoes and other noisy contact points. Sold in bulk in a 25 foot roll.
Mounting adapter to mount SR receivers into SuperSlot or unislot on Ikegami and Panasonic cameras. Includes bezel, gasket, and screws.
General purpose AC adapter capable of 120 VAC and 12 VDC.
Zippered Cordura pouch for ALP antennas.
Adjustment tool (or tweaker) for setting transmitter gain, roll-off pots, and frequency switches.
For UM200 and UM400-type belt-pack units.
Hinged belt clip, bezel and frequency door for with mounting screws
15" 1/8" (3.5mm) mono mini-phone to three-pin XLR (Unbalanced) output cable for UCR100 receiver.
Protective pouch with belt clip for HM plug-on transmitters.
Protective leather pouch with plastic window and rotating belt clip for SM series transmitters with two batteries, including the SMQV and SMDB.
Tunable 100 MHz bandwidth antenna for use with wireless receivers or IFB transmitters.
Provides 12 dB signal amplification for long cable runs or distribution to multiple receivers in 230 MHz passband.
Watertight belt-pack transmitter with Lectrosonics M152/WP Water-Resistant Lavalier Microphone.
Allows 12T microphones to operate with 48V phantom power.
Attenuates line level signals by 50dB to provide mic level output.
Provides transformer isolation between equipment.
Power adapter for external powering Sennheiser G3 or G4 receivers. Available wired for BDS, 4-pin Hirose, or unterminated.
Removes ground loop hum, mode noise & differentially induced hum in one device.
One foot cable for recording from an XLR mic on a mobile device. 3.5mm monitoring tap included
Adapts a Lemo 3-pin lavalier connector (e.g. older Sennheiser wireless, Zaxcom, and Wisycom tx) to 3.5mm for use with the Sennheiser G3 and AVX tx.
Adapts a Lemo 3-pin lavalier connector (e.g. older Sennheiser wireless, Zaxcom, and Wisycom tx) to TA5F for use with Lectrosonics tx.
Provides a flat surface for mounting accessories to a camera shoe.
Hypoallergenic waterproof tape. Ideal for securing lavaliers to skin. 5 yards.
Designed for long cylindrical microphones.
Rechargeable NP-50 style 3.6V 1000mAh LIon battery for the Lectrosonics SSM and Zaxcom ZMT transmitters.
For use with an NP-50 or compatible lithium ion rechargeable battery.
Military inspired audio vest for field use.
Lithium ion portable smart battery charger.
Eight Hirose output connectors, power regulator, and fuel gauge for battery info. Usable with SLA, NI-MH and Li-Ion batteries.
Designed for use over the Windtech SG-60 and SG-81 windscreens.
Fits the Sennheisr MKH 816 and similarly-sized long shotguns.
Fits the Rode NTG1/2, Sennheiser MKH-60, and most similarly-sized mics.
Fits the Neumann KMR-81i/D, Sanken CS-1, and most similarly-sized mics.
Jointed 2.4 GHz antenna for Zaxcom Nomad Recorder.
Uncut whip antenna for TRXLT, TRXLA, and ZMT3 series transmitters.
Boom pole mount for XLR cable or plug-on transmitter.
15" right-angle XLRF to XLRM thin cable with boom pole mount for XLR cable or plug-on transmitter.
Omnidirectional dynamic microphone with 9.5" handle for keeping interviewer's hand out of the shot.