Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Supercardioid mic with gooseneck mount and accessories designed for recording cello.
Supercardioid mic with gooseneck mount and accessories designed for recording trumpet, trombone, and tuba.
Supercardioid mic with gooseneck, mount and accessories designed for recording drums.
Single ear omnidirectional earset mic with 90mm boom arm and Microdot connector (adaptor required). Mic adjustable left or right.
Dual ear omnidirectional headset mic with 90mm boom arm and Microdot connector (adaptor required). Mic adjustable left or right.
Closed-back professional monitor over-ear headphones. Collapsible. Includes three detachable cables.
16 XLR input / 8 XLR output rack unit with 16 mic preamps and a Cat5 cable output through the dSNAKE EtherCon port.
64 channel lightweight, portable audio interface with Dante and MADI support.
Control house HVAC systems.
Simple and compact 18-in, 8-out USB audio interface.
Provides power and RF for six diversity receivers.
Lav with 1/8" (3.5mm) locking connector for Sennheiser evolution, AVX, SpeechLine, and XS wireless series.
For shotgun mics up to 11" long with a 22" diameter, such as the Aputure Deity or Rode NTG.
Includes fuzzy windscreen, shock mount, boom pole, XLR cable, and case.
Dual ear cardioid headset mic with 120mm boom arm and Microdot connector (adaptor required). Mic adjustable left or right.
Single ear cardioid headset mic with 120mm boom arm and Microdot connector (adaptor required). Mic adjustable left or right.
Dual ear cardioid headset mic with 120mm boom arm and TA4F connector for Shure wireless. Mic adjustable left or right.
Dual ear cardioid headset mic with 120mm boom arm and 3.5mm locking connector for Sennheiser wireless. Mic adjustable left or right.
Designed for use with shotgun mic pairs in parallel, including the Schoeps MiniCMIT, Sennheiser MKH 8060 and 416, Sanken CS-1, and DPA 4017C.
Designed for use with shotgun mic pairs in a XY configuration, including the Sennheiser MKH 8040 and Schoeps CCM 4L.
Designed for use with single stereo mics, including the Sanken CS-5/50 and Sennheiser MKH 418.
Designed for use with shotgun mic trios, including the Schoeps MiniCMIT, Sennheiser MKH 8060 and 416, and Schoeps CCM 4L.
Designed for use with mics such as the Tetramic and Sennheiser Ambeo.
Designed for the Sound Devices MixPre 3/6 and Zoom F4/F8 recorders.
Medium rigid-frame protective bag for recorder, mixer & wireless mics designed for quiet operation.
XLR4 cable for connecting PSC Bell & Light Station to the power supply or another station.
Allows the user to play designated light and bell sequences at up to 1000 ft when installed in a Bell & Light Power Supply.
Eight balanced input / ten output interface and mixing console with DSP for each discrete channel, and touchpad fading
Charges two SB900A, UR5, P3RA, P9RA, P10R, or QLX-D/ULX-D Digital Wireless Systems batteries.
Charges eight SB900A, PSM900, PSM1000, UR5 Portable Diversity Receiver, or ULX-D Digital Wireless Systems batteries.
Charges two SB900A rechargeable batteries. Requires SBC or SBRC charging housing (sold separately).
Designed for bag use with a recorder, two channels of wireless, boom pole, shotgun mic, and power, cables, and accessories.
Low sensitivity lav for tx with lower supply voltage hardwired 3-pin Lemo for Lectrosonics SSM, Zaxcom, WisyCom, and Sennheiser 2000 and 3000/5000 (SK). Increased dynamic range and sound quality over original DPA 4060s.
High sensitivity lav hardwired TA5F for Lectrosonics. Increased dynamic range and sound quality over original DPA 4060s.
End plate for SRc or SR (with SuperSlot) receivers that adds a micro USB port for firmware updates.
Custom-fit carrying bag for Sound Devices MixPre-10T recorder.
High sensitivity lav hardwired 3-pin Lemo for Lectrosonics SSM, Zaxcom, WisyCom, and Sennheiser 2000 and 3000/5000 (SK). Increased dynamic range and sound quality over original DPA 4060s.
High sensitivity lav hardwired with TA4F connector for Shure transmitters. Increased dynamic range and sound quality over original DPA 4060s.
High sensitivity lav with 3.5mm locking connector for Sennheiser 100 series wireless. Increased dynamic range and sound quality over original DPA 4060s.
Low sensitivity lav with a Microdot connector (adaptor required). Increased dynamic range and sound quality over original DPA 4060s.
Low sensitivity lav hardwired 3-pin Lemo for Lectrosonics SSM, Zaxcom, WisyCom, and Sennheiser 2000 and 3000/5000 (SK). Increased dynamic range and sound quality over original DPA 4061s.
Low sensitivity lav hardwired with TA4F connector for Shure transmitters. Increased dynamic range and sound quality over original DPA 4061s.
Low sensitivity lav hardwired with 3.5mm locking connector for Sennheiser Evolution G3, G2 and X2T transmitters. Increased dynamic range and sound quality over original DPA 4061s.
Low sensitivity lav hardwired with TA5F connector for Lectrosonics transmitters. Increased dynamic range and sound quality over original DPA 4061s.
Stereo X/Y microphone with a lightning connector for iPhone, iPad, and iPod Touch.
Middle side microphone with a lightning connector for iPhone, iPad, and iPod Touch.
Supercardioid condenser mic bundled with your choice of accessories from Rycote and CineLa.