Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Adjustment tool (or tweaker) for setting transmitter gain, roll-off pots, and frequency switches.
For UM200 and UM400-type belt-pack units.
Hinged belt clip, bezel and frequency door for with mounting screws
15" 1/8" (3.5mm) mono mini-phone to three-pin XLR (Unbalanced) output cable for UCR100 receiver.
Protective pouch with belt clip for HM plug-on transmitters.
Protective leather pouch with plastic window and rotating belt clip for SM series transmitters with two batteries, including the SMQV and SMDB.
Tunable 100 MHz bandwidth antenna for use with wireless receivers or IFB transmitters.
Provides 12 dB signal amplification for long cable runs or distribution to multiple receivers in 230 MHz passband.
Watertight belt-pack transmitter with Lectrosonics M152/WP Water-Resistant Lavalier Microphone.
General purpose AC adapter capable of 120 VAC and 12 VDC.
Zippered Cordura pouch for ALP antennas.
Velcro-flap storage pouch with belt loop for the PR-216 and other Comtek transmitters and receivers.
Self tuning IFB receiver.
Sticker-backed foam for padding shoes and other noisy contact points. Sold in bulk in a 25 foot roll.
Mounting adapter to mount SR receivers into SuperSlot or unislot on Ikegami and Panasonic cameras. Includes bezel, gasket, and screws.
For 552, 664, MixPre, MixPre-D, or MP-2 tape output to 442/302 mix in.
Includes detachable cable with 3,5mm connector.
Assorted shims to make 7mm SSD drives fit with the 970 and PIX recorders.
Set of four clear Lexan LCD screen protectors for the 702, 702T, 722, 744T, and 788T.
Powers the 552, 633, 664, 688, MixPre-D, PIX 220(i), PIX 240(i), and all 7 Series recorders through a Hirose 4-pin connector.
Converts an unbalanced line, instrument or speaker level signal to low impedance balanced mic level.
Converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.
Combines two line-level signals into one line level output.
Used to apply DC power to a coaxial antenna line for remotely powering the UFM230 filter/amp.
Battery eliminator replaces the batteries and door on the LR receiver to allow for DC power.
Battery eliminator replaces the batteries and door on the LT transmitter, allowing for DC power.
etherCON RJ45 feedthrough coupler for Cat5 cable extension.
For ball-shaped microphones with a diameter of 2.0".
For ball-shaped microphones with a diameter of 2.25".
Designed to fit over small headphones, such as the Sennheiser HD25.
Universal 4 pin power supply for the ULN-2 and ULN-8.
7 x 11" acrylic engraved dry-erase slate.
For 1-12 Micro AAA / Mignon AA, 1-6 Baby C / Mono D and 1-2 9V Block NiCd/NiMH rechargeable batteries. Includes automatic refreshing function and 2 USB charging sockets.
18" long BNC 50 ohm male to 4-pin Lemo male mini (TC-IN) cable for timecode input on Red Epic and Scarlet series cameras.
3/8" female thread to 5/8" 27 gauge male thread.
For mounting multiple accessories on a camera shoe.
Multi-unit charging station for up to six walkies. Compatible with the CP200, CP200D, PR400, CP200XLS, and CP150.
Allow adaptation of a PowerTap connector for 12 VDC on-camera light.
A five pack of HDD/SSD caddies that work with all Atomos monitors/recorders.
Splits HDMI input to two HD-SDI outputs. Fits onto any device with a Sony NP Battery Slot with a 2600mAh Battery x1.
320 ppi with 4k HDMI/SDI and 3G SDI inputs and outputs.
High-definition video camera with Zoom's interchangeable mic capsule system.
Rounded rubber foam bumper suitable for any modern (post-1997) 6-section VdB boom pole.
XLR male to TRS adapter for Blackmagic Design Cinema Camera.
SDHC UHS-I card. Currently not recommended for use with Sound Devices recorders due to some card thickness variance.
18" long 5-pin Lemo male (TC-OUT) to BNC 50 ohm male timecode cable