Includes a handheld microphone, a plug-on receiver and all accessories to operate out of the box with camcorders and DSLR cameras.
For ball-shaped microphones with a diameter of 2.25".
Rack-mountable 64-track Audio Recorder/Player with time code.
1200mAH 9V battery
1000 mA 9V.
External 9V power for Timecode Buddy: Mini Tx through Hirose 4-pin connector.
Protective pouch with a belt clip for the :minitrx+ time code generator.
Includes a :pulse time code and metadata hub, two UltraSync One sync boxes, and pouches.
Recommended for use with a CMC mic amplifier and capsule.
XLR male to TRS adapter for Blackmagic Design Cinema Camera.
Control box for the Cantar Mini recorder with six assignable rotary controls.
Control box for the Cantar Mini and Cantar X3 recorder with eight assignable rotary controls.
Chip which reduces unwanted RF signals by -40dB when soldered into a straight 3-pin XLRF connector.
Chip which reduces unwanted RF signals by -40dB when soldered into a Cable Techniques low-profile side exit XLRF connector.
Attaches to an A10 Receiver to change the orientation when inserted into an SL-6 or A10-Rack
Durable, waterproof, lightweight and portable tent.
Digital wideband transmitter with simultaneous recording and transmitting for balanced mics and line-level inputs.
Digital wideband receiver with dual XLR input and Hirose4 power cable.
Digital wideband receiver with D‐sub connector for universal and SuperSlot.
Replacement mounting plate for A10 Receiver with Universal/SuperSlot adapter.
25 Pin D-Type Universal/Superslot end plate for the A10-RX.
End plate for A10-RX with dual XLR inputs and Hirose4 power connection.
Replacement belt clip for A10 bodypack transmitter.
Accessory plate for mounting the A10-TX on a boom poles with a 3/8" threaded top screw.
Protective neoprene case for the A10-TX.
Antenna with SMA connector for A10-RX and A10-TX.
For use with Phonak invisty, Comtek, and other in-ear receivers.
Four-slot, eight-channel, Dante-enabled wireless enclosure compatible with most unislot and SuperSlot receivers.
Converts an A10-RX receiver into a two channel headphone monitor.
No connectors. Requires soldering.
Can be set to 15, 20, or 25 dB. Passes phantom power
Used to connect balanced and unbalanced devices having different signal levels or impedances.
Helps to eliminate electrical and mechanical noise in an audio system such as 60Hz electrical hum from AC power lines, low-frequency rumble caused by wind noise or air conditioning system, and stage/floor noise transmitted to a microphone through the microphone stand
Converts balanced line level signals to microphone level (50dB attenuation)
Reverses the phase (polarity) of a balanced audio signal. In line switch permits selection of normal or reversed polarity for comparison purposes.
RF filter, XLR in/out. Passes phantom power
700 Hz microphone-level signal
64 channel AD/DA Dante, Madi, and ADAT converter with 32 channels of analog I/O.
For SM81, KSM141, KSM137, 16A, VP64 and SM63 models.
For SM58, SM86, SM87, SM87A, BETA87A, BETA87C and all other 3/4" and larger handles.
1.2V, 2700mAh NiMH batteries.
Charges up to eight AA or AAA rechargeable nickel-metal hydride batteries in approximately one hour.
1.2V, 1000 mAh NiMH batteries.
Hypoallergenic waterproof tape. Ideal for securing lavaliers to skin. 5 yards.
Leather case for ACL204.
Protective pouch for the ACN Tiny Lockit box.
[email protected] (212) 629-9430[email protected] (404) 855-2255