VRX1 VHF IFB Audio Receiver Five-Pack

The VRX1 VHF IFB audio receiver is designed to monitor audio and cue talent in film, television, and broadcast environments. It features an intuitive voice prompt system, voting, frame specific audio delay, an adaptive squelch, headphone equalization, and multiple power options all in a lightweight, rugged, and easy to use device. The advanced FM analog receiver uses direct conversion to receive audio with flat EQ, low distortion, and no RF interference.

Frequency Range
The VRX1 operates in the VHF 192-217 MHz frequency range and comes pre-programmed with 10 industry standard channels. The unit is compatible with Comtek BST 75-216, BST 25-216, and M-216 transmitters, allowing you to mix and match VRX1 with other IFB receivers in your setup. Two push buttons control selectable channels and settings, and each button can be programmed to limit control or be completely disabled. Any of the 10 pre-programmed channels can be reconfigured using the optional Zaxcom GUI Bridge (sold separately).

Advanced Features
A voice prompt system can announce the current channel, channel selection, battery life, and other key settings through headphones, providing a seamless interaction without needing to look down at the device. A voting feature automatically connects VRX1 to the strongest transmitter signal when more than one transmitter is in operation. Both voting and voice prompts can be disabled, if desired.

Other features include audio delay settings that can be customized for each user from 1 to 15 frames, an adaptive squelch algorithm that intelligently minimizes noise when a transmitter signal is absent or weak, and standard 3.5mm output that connects to headphones or earpieces. The 3.5mm audio output is selectable to be unbalanced or balanced allowing you to feed a single track of audio to the input of a camera.

VRX1 advanced settings can be configured using the optional Zaxcom GUI Bridge (ZGB). Basic settings can be controlled both locally and through the ZGB.

Power
The VRX1 has multiple power options, including two alkaline, NiMH, or lithium batteries. Alkaline provides up to 9 hours of runtime, NiMH up to 13 hours, and lithium up to 17 hours.

Rechargeable NiMH batteries can be recharged directly through VRX1 using the USB-C port or using th dual charger (sold separately).

The USB-C connection can also power the VRX1.