TA5F Connector, Large Gauge

<Electrical></Electrical> <Contact Resistance>.010 ohms maximum after life (and after salt spray)</Contact Resistance> <Current Rating (Carry Only)>5 A, 125 V AC (4 A, 125 V AC on 5 circuit) based on 30°C maximum</Current Rating (Carry Only)> <Insulation Resistance>510,000 megohms minimum @ 500 VDC (initial); 10,000 megohms minimum (after humidity test)</Insulation Resistance> <Dielectric Strength>1,000 V (rms)</Dielectric Strength> <Mechanical></Mechanical> <Life>5,000 operations minimum</Life> <Insertion/Withdrawal Forces (after life)>6.1 lb./2.77 kg after life, insertion; 5.6 lb/2.54 kg, withdrawal.</Insertion/Withdrawal Forces (after life)> <Solderability Standard>Meets EIA RS-186-9E.</Solderability Standard> <Mechanical Shock>Meets MIL-STD-202, method 213B</Mechanical Shock> <Vibration>MIL-STD-202, method 201A.</Vibration> <Wire Size>#22 wire gauge solid; #24 wire gauge stranded.</Wire Size> <Environmental></Environmental> <Thermal Range>-55°C to + 85°C.</Thermal Range> <Humidity>Meets MIL-STD-202, method 106D.</Humidity> <Thermal Shock>Meets MIL-STD-202, method 107D.</Thermal Shock> <Salt Spray>Meets MlL-STD-202, method 101.</Salt Spray> <Material></Material> <Housing, Plugs, and Male Receptacles>Copper alloy, nickel-plated. Female Receptacle–Die-cast zinc, nickel-plated.</Housing, Plugs, and Male Receptacles> <Black Tini Q-G® Housing>Copper alloy, black chrome-plated.</Black Tini Q-G® Housing> <Pin and Socket Contacts>Copper alloy, silver-plated</Pin and Socket Contacts> <Flex Relief>Molded black thermoplastic elastomer</Flex Relief> <Latch Button>Molded black thermoplastic</Latch Button> <Release Lever and Mounting Washer>Steel, Nickel-plated</Release Lever and Mounting Washer> <Standoff/Ground Terminal and Cable Stamp>Steel, Electrotinned</Standoff/Ground Terminal and Cable Stamp> <Inserts and Insulating Spacer>Molded, high strength thermoplastic</Inserts and Insulating Spacer> <Latch (Female)>Copper alloy, nickel-plated</Latch (Female)> <Mounting Nut>Copper alloy, nickel-plated</Mounting Nut>