Scorpio Recorder Bag & Power Bundle

<Frequency Response> 10 Hz to 80 kHz ± 0.5 dB (192 kHz sample rate, re 1 kHz) </Frequency Response> <THD + Noise> 0.005% max (1 kHz, 22 Hz–22 kHz BW, trim @20, fader @ 0, -10 dBu in) </THD + Noise> <Equivalent Input Noise> -131 dBV (-129 dBu) max (A-weighting, 76 dB gain, 150 ohm source impedance) </Equivalent Input Noise> <Processing Engine> Highly extensible, full FPGA-based audio processing, 3 FPGAs </Processing Engine> <> Six-way ARM multiprocessor system </> <> 64-bit audio processing precision </> <Audio Over Ethernet> Dante, 32 channels in, 32 channels out </Audio Over Ethernet> <> AES67 compatible </> <> 1 Gb/s Ethernet, 2 ports, transformer-balanced </> <Inputs> </Inputs> <Mic/Line Inputs> 16 total, all fully featured; 6 on full-size XLR, 2 on TA3, 8 on TA5 </Mic/Line Inputs> <Mic-levels Inputs (XLR, TA3, TA5)> Class-A, discrete differential long-tail pair, 4k ohm input impedance </Mic-levels Inputs (XLR, TA3, TA5)> <Live-level Inputs (XLR, TA3, TA5)> Active-balanced, 4k ohm input impedance </Live-level Inputs (XLR, TA3, TA5)> <> AES3 or AES42 available on XLR inputs 1 and 6 </> <AES42> +10 V, 250 mA available, type-1, auto-ASRC </AES42> <Rtn A, B, C (3.5mm/10-pin)> Bnbalanced 2-channel, 4k ohm input impedance </Rtn A, B, C (3.5mm/10-pin)> <Com Rtn 1, 2 (TA3, 3.5mm)> Balanced, 1-channel, 8k ohm input impedance </Com Rtn 1, 2 (TA3, 3.5mm)> <External Slate Mic (TA5)> Balanced, 8k ohm input impedance, menu-selectable 12 V phantom </External Slate Mic (TA5)> <Maximum Input Level> </Maximum Input Level> <Mic> +8 dBu (2.0 Vrms) </Mic> <Line> +28 dBu (19.5 Vrms) </Line> <Rtn A, B, C> +18 dBu (6.2 Vrms) </Rtn A, B, C> <Com Rtn 1, 2> +24 dBu (12.3 Vrms) </Com Rtn 1, 2> <<External Slate Mic>> +12 dBu (3.2 Vrms) </</External Slate Mic>> <High-Pass Filters> Adjustable 40 Hz to 320 Hz, 18 dB/oct. 1st stage analog (before preamp), 2nd stage digital </High-Pass Filters> <Limiters> Limiters available at all channels, buses, headphones, for all sample rates </Limiters> <> Analog first stage, all subsequent stages digital </> <> Attack time: 1 ms </> <> Release time: adjustable, 50 ms to 1000 ms </> <> Threshold: adjustable, -2 dBFS to -12 dBFS </> <> Selectable knee: hard or soft </> <> Selectable ratio: inf:1, 20:1 </> <Delay> Channel Adjustable 0-50 ms </Delay> <> Output Adjustable 0-500 ms </> <Maximum Gain> </Maximum Gain> <Trim Stage (Mic Input)> 76 dB </Trim Stage (Mic Input)> <Trim Stage (Line Input)> 36 dB </Trim Stage (Line Input)> <Fader Stage> 16 dB </Fader Stage> <Bus Stage> 16 dB </Bus Stage> <Headphone Stage> 20 dB </Headphone Stage> <Mic-to-Line> 108 dB </Mic-to-Line> <Mic-to-Headphone> 112 dB </Mic-to-Headphone> <Outputs> </Outputs> <XLR (L, R)> Active-balanced, 250/3.2k/120 ohms (mic/-10/line) </XLR (L, R)> <Hirose 10-in (L, R)> Active-balanced, 250/3.2k/120 ohms (mic/-10/line) </Hirose 10-in (L, R)> <TA3 (X1-X6)> Active-balanced, 250/3.2k/120 ohms (mic/-10/line) </TA3 (X1-X6)> <3.5mm (X7, X8)> Unbalanced, stereo, 1.8k ohms </3.5mm (X7, X8)> <Headphone Outputs> ¼”, 2.5mm </Headphone Outputs> <> TA5 (along with mic input pins) for single connection to headset + mic </> <> High output, 4 ohm output imedance, 400 mW + 400 mW at each connector, all individually driven </> <> Compatible with headphones of any impedance </> <Maximum Output Level (all into 10k load)> </Maximum Output Level (all into 10k load)> <Line> +20 dBu (7.8 Vrms) </Line> <“+10”> +6 dBu (1.5 Vrms) </“+10”> <Mic> -20 dBu (0.078 Vrms) </Mic> <X7/X8 Out> +6 dBu (1.5 Vrms) </X7/X8 Out> <Headphone outputs (¼”, TA5, X9/X10)> +14 dBu (4.0 Vrms) </Headphone outputs (¼”, TA5, X9/X10)> <A/D Converters> 32-bit, 120 dB, A-weighted dynamic range typical </A/D Converters> <Sampling Rates> 44.1 kHz, 47.952 kHz, 48 kHz, 48.048 kHz, 88.2 kHz, 96 kHz, 192 kHz </Sampling Rates> <Digital Outputs> AES3 transformer-balanced, in pairs; 1-2 (XLR-L), 3-4 (XLR-R), 5-8 (Hirose 10-pin A) </Digital Outputs> <> 110 ohm, 2 V p-p, AES and S/PDIF compatible </> <Recording> Internal 256 GB SSD </Recording> <> Two removable SD Cards </> <> Simultaneous recording to internal SSD and the two SD cards </> <> exFAT formatting </> <> 36 tracks (32 iso channels, 4 buses) </> <> Broadcast WAV monophonic and polyphonic file format </> <> 64-bit WAV (RF64) monophonic and polyphonic; support for files > 4 GB </> <USB> USB-C (USB 3.1 type 1) for file transfer of internal SSD, both SD Cards </USB> <> USB-A host for keyboard, external controller, external USB hubs supported for connecting multiple devices </> <Wireless> Built-in Bluetooth v5.0 BLE (not supported with rev 1.0 release of SD-Remote) </Wireless> <Timecode and Sync> </Timecode and Sync> <Modes Supported> Off, Rec Run, Free Run, 24h Run, External, including External Auto-Record and Continuous modes. </Modes Supported> <Frame Rates> 23.98, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND </Frame Rates> <Sample/Timecode Accuracy> 0.1 ppm (0.25 frames per 24 hours) </Sample/Timecode Accuracy> <Timecode Input> 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3 dBu) </Timecode Input> <Timecode Output> 75 ohm impedance, 5 V p-p (+12 dBu) </Timecode Output> <Word Clock Input> 10k/75 ohm selectable impedance, 1-5 V p-p input sensitivity </Word Clock Input> <Word Clock Output> 75 ohm impedance, 5 V p-p output, at SR </Word Clock Output> <Remote Control> USB MIDI Control - 3rd party fader controllers </Remote Control> <> SD-Remote Android app </> <> USB Keyboard </> <> External Timecode Record Trigger </> <LCD> 320x240, Transflective, excellent sunlight visibility </LCD> <> Larger touchscreen display available via USB-connected SD-Remote app </> <Power> </Power> <External> Dual 10-18 V inputs on locking TA4 connectors, pin-4 = (+), pin-1 = (-) </External> <> Dual rear-mount Sony-style L-mount batteries with chargers </> <Idle Current Draw> 875 mA @ 12 V (10.5 W) </Idle Current Draw> <> Intelligent power-down of unused mic preamps and other internal circuits </> <Environmental> </Environmental> <Operating Temperature> -20° C to 60° C, 0 to 90% relative humidity (non-condensing) </Operating Temperature> <Storage> -40° C to 85° C </Storage> <Dimensions ( H x W x D)> 5.1 cm x 32 cm x 20.5 cm ( 2 in x 12.6 in x 8.1 in) </Dimensions ( H x W x D)> <Weight> 5.8 lbs (2.63 kg) unpackaged, without batteries </Weight>