The RPU500 is a full duplex portable transceiver unit designed for news. It features a transmitter capable of transmitting in VHF, UHF, and the 940-960 MHz band and a UHF receiver for talk-back.
The unit has two 3.5mm outputs, so it can send to two people (e.g. a host and a guest). Inputs are a XLR3F balanced connector with 48V/12V phantom and an AUX 3.5mm audio shared input. It can be powered by a battery pack or DC via the 4-pin Hirose connector.
The RPU500 can be monitored and controlled through USB-C/Bluetooth from a PC using the Wisycom Manager software.
Starting in 2017, the 617-652 MHz and 663-698 MHz frequencies are being transitioned by the Federal Communications Commission (FCC). Users of wireless microphone devices that operate in any portion of those frequencies must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC’s wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
[email protected] (212) 629-9430[email protected] (404) 855-2255