Contains everything you need to start using Lectrosonics' L-series as a camera hop, including a LR receiver and LT transmitter with removable antennae, selectable 50/100 mW RF power, line input level select, and RM remote control capability, plus amera shoe mount, and cables: one each of TA3F to XLRM, TA3F to 1/8" TRS, TA5F to XLRF cable (mic level) and TA5F to XLRF cable (line level).
LT Wideband Bodypack TransmitterThe LT transmitter features 25 or 100 kHz tuning steps (yielding up to 3,072 selectable frequencies), an integrated multi-function switch with menu-selectable modes for power, mute or talkback, and a graphic LCD and membrane switch panel plus IR synch port for ease of setup and operation. The LT additionally facilitates user-selectable RF transmission power of 50 or 100 mW. A detachable antenna adds to the LT's versatility by allowing for remote mount antennas. Also, the LT responds to remote commands from either the dedicated Lectrosonics RM remote unit or smartphone apps with this capability. Along with the standard Lectrosonics microphone input, a user-selectable 1 MOhm input is ideal for use with musical instruments, including guitars with passive pickups. The LT is housed in a newly designed machined aluminum housing featuring a super-hard EbNi ‘Ebony’ conductive finish. Power is provided via two AA batteries. Applications for the LT transmitter include TV and film production, ENG, stage, musical instruments, camera hops, corporate AV, and many others.
LR Wideband Bodypack ReceiverThe ultra-compact LR receiver takes the Lectrosonics Digital Hybrid Wireless® compact receiver concept to an entirely new level. Designed to be ultra-portable for use with DSLR, 4/3, small 4K, and other compact HD cameras, the LR's diminutive size belies the technology inside. The wide tuning bandwidth with tracking front-end filters provides plenty of flexibility while avoiding the vulnerabilities of wider pass bands. Tuning steps are user selectable at 25 or 100 kHz, yielding up to 3,072 operating frequencies. Compatibility modes enable the LR to operate with older analog transmitters. Dual antenna diversity improves range and resistance to dropouts. The RF spectrum analyzer and Lectrosonics’ SmartTune capability make quick work of finding clean frequencies on site. A large, backlit LCD provides instant, clear information for setup and status monitoring while operational. Detachable antennas allow for remote antenna mounting. The LT is housed in the latest machined aluminum shell with super-hard EbNi ‘Ebony’ conductive finish. The unit is powered with two AA batteries.
CONSUMER ALERT: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
Some versions of this wireless microphone device may operate in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC’s wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
[email protected] (212) 629-9430[email protected] (404) 855-2255