KP18V Coiled Cable

The KP10V Coiled Cable is a right-angled XLR3 to TA3 cable for the KP18V KlassicPro Mighty Boom Pole. Installation requires a KlassicPro base module (sold separately).

Mighty Boom Poles have a removable headpiece so installation requires no soldering; simply drop the cable through the top section once the headpiece is removed, plug the TA3 into your base module and attach to the bottom of your boom pole.

The right-angle connector at the top of the cable is smaller and lighter than its predessor, as well as serviceable and made with the Neutrik connector as its base. In addition, the cable incorporates thicker gauge wiring and aluminum shielding to make it both stronger and more protected from radio frequency (RF) interference.

The solid strain relief make the connector remarkably robust while securely holding the wiring in place. As an added benefit, the connector orientation can be changed by simply unthreading its housing, rotating it to the desired position, and locking it back in place. 

The TA3 at the base of the cable is surrounded by a machined Delrin shell to secure the cable to the connector. Simply plug the TA3 into the male end of the case module. In extreme weather conditions it may be wise to unplug and remove the cable from inside the pole. Keeping the bottom open by removing the bottom module or using a KPFT flow-through base to allow water to drain through the pole instead of filling the inside of the tubes.