KH 80 DSP A G Monitor

<Free field frequency response ±6 dB >53 Hz … 21 kHz</Free field frequency response ±6 dB > <Free field frequency response ±3 dB >57 Hz … 21 kHz</Free field frequency response ±3 dB > <Free field frequency linearity deviation between 100 Hz and 10 kHz >± 0.7 dB</Free field frequency linearity deviation between 100 Hz and 10 kHz > <Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced >±0.26; ±0.23; ±0.17 dB</Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced > <Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) ><20 dB(A) SPL</Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) > <Sine wave output with a THD < 0.5 % at 1 m in half space >90 dB SPL (>200 Hz)</Sine wave output with a THD < 0.5 % at 1 m in half space > <Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) >108.8 dB SPL</Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) > <Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) >102.8 dB SPL</Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) > <Bass capability>92.1 dB SPL (Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz)</Bass capability> <Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions >104 dB(C) SPL</Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions > <Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range) >93 dB(C) SPL</Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range) > <Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer) >100 dB(C) SPL</Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer) > <Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) >88 / 93 dB(C) SPL</Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) > <Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) >91 / 96 dB(C) SPL</Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) > <Analog input(s) >XLR / 6.3 mm (¼”) Jack: analog electronically balanced</Analog input(s) > <Analog input impedance >14k Ohms</Analog input impedance > <Max. input level >+24 dBu for 94 dB SPL setting; +18 dBu for 100 dB SPL setting; +10 dBu for 108 dB SPL setting; +4 dBu for 114 dB SPL setting</Max. input level > <Common mode rejection ratio (CMRR) >>56 dB @ 15 kHz</Common mode rejection ratio (CMRR) > <Volume control >via Neumann.Control software</Volume control > <Volume control range; resolution >0 … -∞ dB; 0.1 dB</Volume control range; resolution > <Input gain control (sensitivity) >0 dB ... -15 dB</Input gain control (sensitivity) > <Output level control (output level in 1 m based on 0 dBu input level) >94; 100; 108; 114 dB SPL</Output level control (output level in 1 m based on 0 dBu input level) > <Digital converter: resolution; design >24-bit DAC; Δ∑</Digital converter: resolution; design > <Digital converter: sampling rate >48 kHz</Digital converter: sampling rate > <Digital internal sampling rate >48 kHz</Digital internal sampling rate > <Dynamic range A-D >114 dB(A)</Dynamic range A-D > <Dynamic range A-D-A >111 dB(A) woofer; 112 dB(A) tweeter</Dynamic range A-D-A > <Dynamic range D-A >114 dB(A) woofer; 117 dB(A) tweeter</Dynamic range D-A > <Latency >2 ms (A-D-A linear phase)</Latency > <Delay: User adjustable delay range >0 … 70 ms</Delay: User adjustable delay range > <Delay: Resolution: time; distance >0.1 ms; 3.44 cm (1 3/8”)</Delay: Resolution: time; distance > <Delay: Max. frames Audio-video synchronisation (lip sync) >1.75 (40 ms frames); 2.1 (33 ms frames)</Delay: Max. frames Audio-video synchronisation (lip sync) > <Delay: Time-of-flight maximum distance >24 m (79 ft)</Delay: Time-of-flight maximum distance > <Controller design >Digital; active</Controller design > <Crossover frequency >1.8 kHz</Crossover frequency > <Crossover slope >48 dB/oct; 8th order with phase correction</Crossover slope > <Equalization: Low-Mid >0; -1.5; -3; -4.5 dB</Equalization: Low-Mid > <Equalization: via Neumann.Control software >8 x full parametric IIR + low / high shelf global balance</Equalization: via Neumann.Control software > <FIR phase correction >Linear phase (170 Hz ... 16 kHz; +/- 45°)</FIR phase correction > <Protection circuitry >Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers</Protection circuitry > <Infrasonic filter: frequency; slope >61 Hz; 12 dB/Okt.</Infrasonic filter: frequency; slope > <Remote control >Neumann.Control software via an RJ45 connector carrying standard IP data</Remote control > <Display: On; Normal Operation >Neumann logo “White”</Display: On; Normal Operation > <Display: Identification >Neumann logo “Rosé”</Display: Identification > <Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute >Neumann logo “Red”</Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute > <Display Brightness >via Neumann.Control</Display Brightness > <Output power woofer amplifier (THD+N with limiter deactivated: 10%) >120 W</Output power woofer amplifier (THD+N with limiter deactivated: 10%) > <Output power tweeter amplifier (THD+N with limiter deactivated: 10%) >70 W</Output power tweeter amplifier (THD+N with limiter deactivated: 10%) > <Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) >90 W</Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) > <Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%) >50 W</Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%) > <Mains Power Supply: input voltage; frequency >100-240 V; 50/60 Hz</Mains Power Supply: input voltage; frequency > <Power consumption (230 V / 100 V): Standby ><330 / <50 mW</Power consumption (230 V / 100 V): Standby > <Power consumption (230 V / 100 V): Idle >9 / 8 W</Power consumption (230 V / 100 V): Idle > <Power consumption (230 V / 100 V): Full output >180 W</Power consumption (230 V / 100 V): Full output > <In-rush current (Peak) >20 A</In-rush current (Peak) > <Standby >Disabled; 90 mins (default); user defined in software</Standby > <Cabinet material >Composite polycarbonate</Cabinet material > <Cabinet surface finish; color (front / back) >Painted; metallic anthracite (RAL 7021) / Black (RAL 9005)</Cabinet surface finish; color (front / back) > <Operating conditions >+10° C to +40° C (+50° F to +104° F); <75% RH; non-condensing</Operating conditions > <Transport/storage conditions >-25° C to +60° C (-13° F to 158° F); <90% RH; non-condensing</Transport/storage conditions > <Woofer >100 mm (4") with protecting black metal grille</Woofer > <Tweeter >25 mm (1") with protecting black metal grille</Tweeter > <Mounting points >2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm (5/8”)</Mounting points > <Product dimensions (height x width x depth) >233 x 154 x 194 mm (9 1/8" x 6" x 7 5/8")</Product dimensions (height x width x depth) > <External net volume >6.7 liters</External net volume >