Kit contains a Electro-Voice RE50 Handheld Microphone and HMa Plug-on Transmitter
The HMa Digital Hybrid Wireless UHF Plug-on Transmitter's unique design will ideally match any microphone or line level source via a standard XLR connector. Phantom power is selectable at 5, 15 and 48 volts, or can be turned off for use with dynamic microphones and line level signal sources.
The design includes a wide tuning range of up to 76 MHz, with tuning steps in increments of 100 kHz or 25 kHz for up to 3072 frequencies. The tuning range covers three standard 25.6 MHz Lectrosonics frequency blocks. Each of the standard blocks includes 256 different pilot tone frequencies for compatibility with all Digital Hybrid Wireless receivers.
The Electro-Voice RE50/B is a specially shock-isolated, omnidirectional, dynamic microphone designed particularly for handheld broadcast and sound- reinforcement use. All handling noise, clothing noise, and even cord shock have been isolated from the microphone element so that mechanically induced noise is greatly reduced. By use of a high-mass zinc internal acoustic chamber, shock mounted within the machined-aluminum outer casing, the RE50/B offers a degree of isolation unprecedented in omnidirectional dynamic microphones.
Starting in 2017, the 617-652 MHz and 663-698 MHz frequencies are being transitioned by the Federal Communications Commission (FCC). Users of wireless microphone devices that operate in any portion of those frequencies must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC’s wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
[email protected] (212) 629-9430[email protected] (404) 855-2255