FTX-1 Single RF Over Fiber Transmitter

The FTX-1 is a RF over Fiber transmitter that uses Simplex fiber and has a 10-24V DC feed. It's available with your choice of 50 ohm impedance for wireless or IEM or 75-ohm impedance for video (BNC, LC/APC, XLR4 power).

It allows the conversion of UHF electrical signals into optical signals, offering the advantages of low loss and wide bandwidth of optical fiber transmission in a lightweight, galvanically isolated system.

The FTX-1 has two operating modes:

• High sensitivity, which enables the reception of UHF signals from wireless systems (analog or digital) in the 470-690MHz range. The signal is filtered and amplified before being sent to the RF/optical converter.
• Low sensitivity, without filtering or amplification, to transmit signals from 0.1 to 3GHz. Three level settings 0/-10/-30dB allow the FTX-1 to adapt to the output level of the connected device. For example, with the -30dB setting, a 50mW transmitter can be directly connected to the FTX-1.

The FTX-1 is compatible with all BSRF radio over fiber receivers, including the AFR-250S, AFR-200, ACH-642, ACH-862, and ACF802.

Its compact size allows it to be integrated into waterproof enclosures and cabinets.