d:dictate 4017C Compact Shotgun Microphone, Mount, & Wind Protection Bundle

<Directional Pattern> Supercardioid, lobe-shaped </Directional Pattern> <Principle of Operation> Pressure gradient, with interference tube </Principle of Operation> <Cartridge Type> Pre-polarized condenser </Cartridge Type> <Frequency Range> 20 Hz - 20 kHz </Frequency Range> <Sensitivity> 19 mV/Pa; -34.4 dB re. 1 V/Pa (nominal, ±2 dB at 1 kHz) </Sensitivity> <Equivalent Noise Level> Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A)) (A-weighted) </Equivalent Noise Level> <Equivalent Noise Level> Typ. 24 dB (max. 26 dB) (ITU-R BS.468-4) </Equivalent Noise Level> <Signal to Noise Ratio> Typ. 81 dB(A) (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) </Signal to Noise Ratio> <Total Harmonic Distortion> < 1% up to 137 dB SPL peak </Total Harmonic Distortion> <Dynamic Range> Typ. 124 dB </Dynamic Range> <Maximum SPL Peak Before Clipping> 146 dB </Maximum SPL Peak Before Clipping> <Output Impedance> 100 Ω </Output Impedance> <Minimum Load Impedance> 2 kΩ </Minimum Load Impedance> <Cable Drive Capability> 100 m (328 ft) </Cable Drive Capability> <Output Balance Principle> Impedance balancing with Active Drive </Output Balance Principle> <Common Mode Rejection Ratio> > 50 dB </Common Mode Rejection Ratio> <Power Supply > 48 V Phantom power (± 4 V) (for full performance) </Power Supply > <Current Consumption> 2.8 mA </Current Consumption> <Connector> XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase </Connector> <Color> Matte black </Color> <Weight> 70 g (2.5 oz) </Weight> <Microphone Diameter> 19 mm (0.75 in) </Microphone Diameter> <Capsule Diameter> 19 mm (0.75 in) </Capsule Diameter> <Microphone Length> 154 mm (6 in) </Microphone Length> <Maximum Output Voltage> 4.5 V (RMS) </Maximum Output Voltage> <Polarity> +V at pin 2 for positive sound pressure </Polarity> <Temperature Range> -40°C to 45°C (-40°F to 113°F) </Temperature Range> <Relative Humidity> Up to 90% </Relative Humidity>