COMM/IFB Box

View larger image View larger image View larger image

West End Recording

w/ XLR5M Output

Model:

COMM/IFB Opt. A

Price:	$489.95

Features

Accepts a mic-level XLR and mic/line TA5 signal and maps them to push buttons
Create an instant intercom, full IFB, or talkback system
Available with XLR5M or two TA3M outputs
Extremely customizable
Powered by internal 9V battery, 2.1mm external power (cable not included), or phantom power (with optional box)
Includes optional belt clip

Description

Overview

The COMM/IFB Box by West End Recording accepts a mic-level XLR and mic/line TA5 signal and maps them to push switches to create an instant intercom, full IFB, or talkback system, It's available with either XLR5M or two TA3M outputs.

It's designed to answer those unexpected demands that come up on set, including talkback to talent or crew or a need for an extra preamp.

The COMM/IFB Box accepts two inputs: one mic-level XLR for a dynamic microphone and one mic or line level TA5 for a lavalier or audio input from a mixer. These two inputs are activated by push buttons on the front of the unit and can be set individually to either "momentary" (only on when pressed) or "latched" (push once to turn on and push again to turn off). These channels can also be ganged together so pushing one button activates both.

Each channel can also be set IFB mode independently. When in IFB mode, line-level audio connected to the TA5F input is routed to the outputs at full volume when the channel push button isn't engaged. When the channel push button is on, the line input is lowered by 15dB to allow the XLR3 mic input to be heard.

When IFB mode is off, no audio is passed when a channel push button is not engaged.

A switchable high pass filters reduces rumble, hum, and other low-frequency noises.

The COMM/IFB Box can be powered by 9V battery, 1.1mm external BDS power supply (cable not included), or phantom power with the PPS-01 or PPS-02 adapter (sold seperately.)

Specifications

<Gain> </Gain> <Microphone Input> 0dB – 61 dB Input to Output </Microphone Input> <Line Input> 6 dB Input to Output </Line Input> <Frequency Response> </Frequency Response> <Mic> -40 to +02 dB, 20 - 20 kHz, -1.25 dB @50kHz (@48dB Gain, 150 ohm source referenced to 1kHz) </Mic> <Line> -0 to -25 dB, 20 - 20 kHz, -2.5 dB @50kHz (@0dBu Input, 150 ohm source referenced to 1kHz) </Line> <High Pass Filter> 200 Hz 3dB / Octave </High Pass Filter> <THD+ Noise> 0.06% max. @ +4dBu output level 20 - 20kHz </THD+ Noise> <Dynamic Range> 97.5 dB </Dynamic Range> <Input Level> </Input Level> <Mic> Max. +0.5 dBu </Mic> <Line> Nom. -10 to +4 dBu, Max. +10 dBu </Line> <Input Impedance> </Input Impedance> <Mic> 2k Ohms (Electronically Balanced) </Mic> <Line> 10k Ohms (Electronically Balanced) </Line> <Output Level> Max. +13 dBu (600 Ohms) </Output Level> <Output Impedance> 50 ohms </Output Impedance> <Phase> Input to Output: 180 degrees </Phase> <Mic Mute> -70 dB (de-selected channel to output) </Mic Mute> <Channel Attenuation (Dim)> -15 dB (line input to output) </Channel Attenuation (Dim)> <Connector Wiring Convention> </Connector Wiring Convention> <XLR> Pin 1: Ground, Pin 2: Hot, Pin 3: Cold </XLR> <XLR 5 Pin> Pin 1: Ground, Pin 2: Channel 1 Hot, Pin 3: Channel 1 Cold, Pin 4: Channel 2 Hot, Pin 5: Channel 2 Cold </XLR 5 Pin> <TA5 (Line Mode)> Pin 1: Ground, Pin 2: Hot, Pin 3: Cold </TA5 (Line Mode)> <TA5 (Electret Mic Mode)> Pin 1: Ground, Pin 2: Ground, Pin 3: Hot (+5 volts @ 5mA Applied) </TA5 (Electret Mic Mode)> <TA3> Pin 1: Ground, Pin 2: Hot, Pin 3: Cold </TA3> <Power Voltage> </Power Voltage> <Internal> 9V Battery (Alkaline or Lithium) </Internal> <External> 9 – 18 VDC via 2.1mm non-locking jack (Pin Positive, Sleeve Negative) </External> <Phantom> 48 VDC via Channel 2 hot and cold signal connections </Phantom> <Current> 72 mA @ 9 VDC (Both channels selected with signal present at mic and line inputs) </Current> <Dimensions> 1.56” x 4.25” x 5.62” (H x W x D), or 40mm x 108mm x 143 mm </Dimensions> <Weight> 12.95 oz (0.37 kg) </Weight>

In the Box

Review

Add new comment

Buy/Rent

Buy

Product:

Add to Wishlist

Rent

Price:

$0.00/billing day

Please note that rental items will be provided from available frequency and color options. If you have a preference or requirement, please indicate it in order comments.

# of billing days subject to duration.
Week = 3 billing days/week
3 Weeks or more = 2 billing days/week

Manual

You are here