Bella 22 Audio Monitor

<AUDIO> </AUDIO> <Channel Input Gain Controls> +10.6 to -31dB </Channel Input Gain Controls> <Loudspeaker/Headphone Gain Control> +10.6 to -31dB </Loudspeaker/Headphone Gain Control> <Channel Off Switch> Fully muted (-infinity dB) when off </Channel Off Switch> <Channel Input Select Switch> Left Ch Only, Right Ch Only, Both Chs (Stereo) </Channel Input Select Switch> <Channel Output Routing Switch> Left Ch Only (Selected Inputs mono'd); Right Ch Only (Selected Inputs mono'd); Both Channels (Stereo if Both I/Ps selected)</Channel Output Routing Switch> <Analog Input Type> Electronically balanced (can be wired unbalanced) </Analog Input Type> <Analog Input Impedance> Greater then 20kOhms </Analog Input Impedance> <Analog Input Connectors> Neutrik XLRs </Analog Input Connectors> <Analog Input Line Up>  Line level (0dBu) </Analog Input Line Up> <Analog Input Frequency Response> Greater than or equal to -0.5dB 22Hz to 22kHz (Measured at Mix Output Mono) </Analog Input Frequency Response> <Analog Input THD + Noise (ref +8dBu)> Greater than or equal to 0.004% @ 1kHz  </Analog Input THD + Noise (ref +8dBu)> <Analog Output Type> Electronically Balanced </Analog Output Type> <Analog Output Connectors> Neutrik XLRs </Analog Output Connectors> <Analog Output Impedance> +17.4dBu </Analog Output Impedance> <Analog Output Frequency Response> Greater than or equal to -0.1dB 22Hz to 22kHz </Analog Output Frequency Response> <Analog Out THD + Noise (ref +8dBu)> <0.002% @ 1kHz </Analog Out THD + Noise (ref +8dBu)> <Headphone Impedance>  100 - 1000 Ohms </Headphone Impedance> <Maximum Headphone Level>  +17dBu into 600 Ohms </Maximum Headphone Level> <Present LED Threshold>  -20dBu </Present LED Threshold> <Present LED Hold Time>  3 seconds </Present LED Hold Time> <Present LED Clip Indication>  Flashes within 1dB of clip point </Present LED Clip Indication> <></> <NETWORK AUDIO> </NETWORK AUDIO> <Network Protocol> Dante </Network Protocol> <AES67>  Compliant </AES67> <DDM>  Certified </DDM> <Full Scale> 0dBu = -18dBFs </Full Scale> <Sample Frequency>  48kHz </Sample Frequency> <Resolution> 24 Bit </Resolution> <Network Interface Type> Gigabit Ethernet </Network Interface Type> <Network Physical Interface> 2x RJ45 copper, 2x SFP Slots (SFP Modules not included) </Network Physical Interface> <></> <SIZE AND POWER> </SIZE AND POWER> <Dimensions>  19" Wide, 1RU High, 164mm deep (excluding connectors/ controls) </Dimensions> <Weight> 3.836043 lbs. </Weight> <Mains Input> 100 to 240 VAC 50/60Hz </Mains Input> <Power Consumption>PoE (Power Over Ethernet); May be powered on either copper network port; Complies to: IEEE 802.3af-2003, Classification Class 0</Power Consumption>