Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
5' interchangeable cable for the H7 Headset wired with a Hirose 4-pin connector for 600, 700, 1000, 1200, 4000, 5000, 7000, and System 10 series tx.
5' interchangeable cable for the H7 Headset wired with a Hirose 4-pin connector for 200, 1100, 1400, 1800, 2000, 2000A, 3000, and 3000A Series.
5' interchangeable cable for the H7 Headset wired with 3-pin Lemo for Audio Limited; Sennheiser SK 50, SK 250, SK 3063, SK 5012, SK 5212, and SK 9000B03; and Shure UR1MLEMO3 transmitters.
5' interchangeable cable for the H7 Headset wired with a Lemo 3-pin for the Lecrosonics SSM, Sennheiser SK 2000, Wisycom, and Zaxcom transmitters.
5' interchangeable cable for the H7 Headset wired with locking 3.5mm for the Sennheiser Evolution Series (G2, G3, and G4), EW 100, EW 300, EW 500, and SK 1093 transmitters.
5' interchangeable cable for the H7 Headset wired with locking 3.5mm for the Sony WRT-805A, UWP Series, UTX-B1, UTX-B2, and UTX-B03 transmitters.
5' interchangeable cable for the H7 Headset for wiring to the connector of your choice.
5' interchangeable cable for the H7 Headset wired with TA3F for AKG DPT700, PT40, PT45, PT60, PT61, PT80, PT81, PT400, PT450, PT470, PT2000, PT4000, and PT4500 transmitters.
5' interchangeable cable for the H7 Headset wired with a TA4F connector for the Electro-Voice 3000 Series, N/DYM NBPU, MSB, BPV, BPU, BPU2, CSB-1000, RE-1, RE-2, and BP-300 transmitters.
5' interchangeable cable for the H7 Headset wired with a TA4F connector for the Line 6 XD-V55, XD-V70, XD-V75, and Relay G50/55/90 transmitters.
5' interchangeable cable for the H7 Headset wired wired with a TA4F connector for Shure AXT100+, BLX1, FP1, GLXD1, PG1, PGX1, PGXD1, QLXD1, SLX1, UC1, ULX1, ULXD1, UR1, and UR1M transmitters and Beyerdynamic TG 100 (gray switch) and TG 1000 (gray switch) transmitters.
5' interchangeable cable for the H7 Headset wired with a TA5F for the Lecrosonics SM, SMa, SMb, SMDa, SMDb, SMQ, SMQa, SMQV, SMV, UM400a, and UM450.
5' interchangeable cable for the H7 Headset wired with a XLR3M.
Modular shotgun condenser microphone capsule for use with DPA d:dicate series, and preamplifier with MicroDot Adaptor
Modular gooseneck preamplifier body with XLRM connector for d:dicate series microphone capsules.
Modular preamplifier body with Microdot connector for d:dicate series microphone capsules. Available with rear or side exit.
Modular preamplifier body with XLRM connector for d:dicate series microphone capsules. Available with rear or side exit.
Extends the run of DPA lavaliers with Microdot connectors for more versatile mic placement.
18" dual TA3F to TA6F line level cable for use with Lectrosonics DCHT stereo digital transmitter.
Line level. For older Tx.
Mic level. For older Tx.
Mic level. For both servo bias and older Tx..
Converts Point Source Audio X-Connectors to selected wireless transmitter.
2' extension cable for the Point Source Audio X-Connector.
Cable box for use with a Rycote suspension with hardwired 5" XLR3F input cable and 17.7" XLR3M output cable.
Cable box for use with an ORTF stereo pair of Sennheiser MKH 8040s or 8050s in an ORTF Windshield kit (AE).
Cable box for use with an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE).
Cable box for use with a Rycote suspension with two hardwired 3.9" & 4.7" XLR3F input cables and 15.7" XLR5M output cable.
Cable box for use with a Rycote suspension with hardwired 5" XLR5F input cable and 17.7" XLR5M output cable.
Short XLR to Lemo cable for use with Schoeps CCM Lemo mics and Rycote Cyclone.