Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Digital wideband transmitter with simultaneous recording and transmitting for balanced mics and line-level inputs.
Replacement belt clip for A10 bodypack transmitter.
Digital wideband receiver with dual XLR input and Hirose4 power cable.
Digital wideband receiver with D‐sub connector for universal and SuperSlot.
Accessory plate for mounting the A10-TX on a boom poles with a 3/8" threaded top screw.
Protective neoprene case for the A10-TX.
Set of nine silicone bands and two clamps for the Track E Time Code Audio Recorder.
Antenna with SMA connector for A10-RX and A10-TX.
For use with Phonak invisty, Comtek, and other in-ear receivers.
Dual ear omnidirectional one-size-fits-all headset mic hardwired 3-pin Lemo for Lectrosonics SSM, Audio Limited A10, Zaxcom, Wisycom, and Sennheiser 2000 and 3000/5000 (SK). Mic adjustable left or right.
Wired with Lemo 3 pin for Audio Limited A10 transmitters.. Includes tie clip, rubber mount, and windscreen. Available in black, white, and beige.
Compact mic body with a gooseneck mount with Lemo3 output for use with Audio Limited A10 or Zaxcom ZMT pocket transmitters
High sensitivity lav hardwired 3-pin Lemo for Lectrosonics SSM, Audio Limited A10, Zaxcom, Wisycom, and Sennheiser 2000 and 3000/5000 (SK).
Dual ear directional one-size-fits-all headset mic hardwired 3-pin Lemo for Lectrosonics SSM, Audio Limited A10, Zaxcom, Wisycom, and Sennheiser 2000 and 3000/5000 (SK). Mic adjustable left or right.
21.5" 3-pin XLRF to 3-pin Lemo heavy-duty cable with built-in filter to reduce unwanted RF signal by -40dB.
End plate for A10-RX or Sound Device A20-RX with dual cable-mount XLR3 analog/AES outputs, Hirose4 male and female power inputs, and micro-USB for firmware update.
Converts an A10-RX receiver into a two channel headphone monitor.
25 Pin D-Type Universal/Superslot end plate for the A10-RX or Sound Devices A20-Rx.
End plate for A10-RX or Sound Device A20-RX with dual panel-mount TA3 outputs, Hirose4 and TA4 power input, and USB-C for firmware update.
Replacement mounting plate for A10-RX and Sound Devices A20-RX with Universal/SuperSlot adapter.
Four-slot, eight-channel, Dante-enabled wireless enclosure compatible with the A10-RX, Sound Devices A20-RX, and most unislot and SuperSlot receivers.
Mid gain sensitivity (-10dB) lav with threaded connector and detachable Lemo 3-pin adapter for Audio Limited A10; Shure AD, AX, ULXD, and UR1; and Sennheiser SK 5000/6000/9000 series transmitters.
Low gain sensitivity (-20dB) lav with threaded connector and detachable Lemo 3-pin adapter for Audio Limited A10; Shure AD, AX, ULXD, and UR1; and Sennheiser SK 5000/6000/9000 series transmitters.
Standard gain sensitivity (0dB) lav with threaded connector and detachable Lemo 3-pin adapter for Audio Limited A10; Shure AD, AX, ULXD, and UR1; and Sennheiser SK 5000/6000/9000 series transmitters.
Digital true diversity wideband receiver. End plate sold separately. Compatible with Audio Limited A10 series.
Digital true diversity wideband receiver with D‐sub connector for SuperSlot and universal slots. Compatible with Audio Limited A10 series.
Digital true diversity wideband receiver with dual TA3 outputs and Hirose4 and TA4 power inputs. Compatible with Audio Limited A10 series.
Digital true diversity wideband receiver with dual XLR outputs and Hirose4 power cable. Compatible with Audio Limited A10 series.
Compact transmitter with full remote control, internal 32-bit float recording option, and built-in time code. Compatible with Audio Limited A10 series.
Interchangeable plate for use with the SX-RX8+ Dual SuperSlot Wireless Module.
BNC to three-pin lemo cable for connecting external time code sources to the A10-TX.
Cradle for the A10-RX or Sound Devices A20-RX receiver that allows it to be used directly as a slot receiver for 13-pin D-type Sony slots.
Attaches to an A10-RX or Sound Devices A20-RX Receiver to change the orientation when inserted into an SL-6 or A10-Rack
For powering devices with a XLR4M power input including the Sound Devices 970, Audio Limited A10-Rack,and Video Devices PIX 250i/260i.
Super-soft hypoallergenic foam-padded pouch sized for the Sennheiser G4/G3, Shure Axient AD1, Sony UWP-D11, Lectro LMB and DCHT, Audio Limited A10/A20, and similarly sized bodypacks
Dual ear headset hardwired 3-pin Lemo for Lectrosonics SSM, Zaxcom, Wisycom, and Audio Limited A10-TX.
Integrates wireless receivers into the Cantar X3 and/or CantarMini UI with support for Audio LTD A10-RX, Lectrosonics SRb & SRc, Sennheiser EK-6042, and Wisycom MCR42.