Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Evolution wireless 500 series G4 plug-on transmitter with XLR connector and phantom power.
Evolution wireless G4 500 series lightweight bodypack receiver.
Includes evolution wireless G4 500 series bodypack receiver and plug-on transmitter with phantom power.
Mounts a standard size boom pole with padded wide holding points on a C-stand.
4-section, uncabled, anodized aluminum boom pole. Extends from 3’2.5″ to 10’10”.
Padded bag designed for the Airo or other short boom pole and accessories.
For smaller mixer/recorders like the SD MixPre-3/6 or Zoom F4/F8. V1 is discontinued. Watch for V2 coming soon.
Fits ~19mm diameter microphones.
3-pin XLR female to 3-pin XLR male cable.
Set of 20 adhesive backed "Peel & Stick" rubberized domed dots in 10 colors for Cable Techniques Low-Profile TA (Mini XLR) connectors.
20 interchangeable colored caps for Cable Techniques Low-Profile TA (Mini XLR) connectors.
Interchangeable colored cap for Cable Techniques Low-Profile TA (Mini XLR) connectors.
3-Pin TA3 female connector with adjustable side exit. Available in ten interchangeable cap colors.
5-Pin TA5 female connector with adjustable side exit. Available in ten interchangeable cap colors.
Set of two adhesive backed "Peel & Stick" rubberized domed dots for Cable Techniques Low-Profile TA (Mini XLR) connectors.
Lightweight two-channel field recorder with lavalier mic. Records at 24 bit/96kHz.
Lightweight two-channel field recorder with SGH-6 shotgun mic and hot shoe shock mount. Records at 24 bit/96kHz.
Lightweight strap that stretches up to 32" with large built-in transmitter pocket. Available in beige, black, and brown.
Lightweight strap that stretches up to 32" with small built-in transmitter pocket. Available in beige, black, and brown.
Soft 4.5" circles for light wind protection and covering mics.
Contains twelve 3.2" x 1" moleskin strips backed with hypoallergenic tape. Includes four each in beige, black, and white.
Medium rigid-frame protective bag for recorder, mixer & wireless mics designed for quiet operation.
Lightweight strap with lengthwise transmitter pouch. Available in beige and black.
XLR4 cable for connecting PSC Bell & Light Station to the power supply or another station.
Allows the user to play designated light and bell sequences at up to 1000 ft when installed in a Bell & Light Power Supply.
Eight balanced input / ten output interface and mixing console with DSP for each discrete channel, and touchpad fading
Charges two SB900A, UR5, P3RA, P9RA, P10R, or QLX-D/ULX-D Digital Wireless Systems batteries.
Charges eight SB900A, PSM900, PSM1000, UR5 Portable Diversity Receiver, or ULX-D Digital Wireless Systems batteries.
Charges two SB900A rechargeable batteries. Requires SBC or SBRC charging housing (sold separately).
Designed for bag use with a recorder, two channels of wireless, boom pole, shotgun mic, and power, cables, and accessories.
Low sensitivity lav for tx with lower supply voltage hardwired 3-pin Lemo for Lectrosonics SSM, Zaxcom, WisyCom, and Sennheiser 2000 and 3000/5000 (SK). Increased dynamic range and sound quality over original DPA 4060s.
6-Section (2'6"-10'3") Klassic high-density graphite pole. Select from uncabled, internal coiled cable (side exit), or internal coiled cable (bottom exit).
High sensitivity lav hardwired TA5F for Lectrosonics. Increased dynamic range and sound quality over original DPA 4060s.
End plate for SRc or SR (with SuperSlot) receivers that adds a micro USB port for firmware updates.
Custom-fit carrying bag for Sound Devices MixPre-10T recorder.
High sensitivity lav hardwired 3-pin Lemo for Lectrosonics SSM, Zaxcom, WisyCom, and Sennheiser 2000 and 3000/5000 (SK). Increased dynamic range and sound quality over original DPA 4060s.
High sensitivity lav hardwired with TA4F connector for Shure transmitters. Increased dynamic range and sound quality over original DPA 4060s.
High sensitivity lav with 3.5mm locking connector for Sennheiser 100 series wireless. Increased dynamic range and sound quality over original DPA 4060s.
Low sensitivity lav with a Microdot connector (adaptor required). Increased dynamic range and sound quality over original DPA 4060s.
Low sensitivity lav hardwired 3-pin Lemo for Lectrosonics SSM, Zaxcom, WisyCom, and Sennheiser 2000 and 3000/5000 (SK). Increased dynamic range and sound quality over original DPA 4061s.
Low sensitivity lav hardwired with TA4F connector for Shure transmitters. Increased dynamic range and sound quality over original DPA 4061s.
Low sensitivity lav hardwired with 3.5mm locking connector for Sennheiser Evolution G3, G2 and X2T transmitters. Increased dynamic range and sound quality over original DPA 4061s.
Low sensitivity lav hardwired with TA5F connector for Lectrosonics transmitters. Increased dynamic range and sound quality over original DPA 4061s.
13"x 13.18" shelf for the Soundcart Explorer.
Medium production sound cart.
Aluminum bar for the Soundcart Explorer.
Allows addition of an additional parallel mounting arm on the Soundcart Explorer.
13" x 10.43" shelf for the Soundcart Explorer.