• A-Series Work Tent

    From

    $1,240.00

    Short description

    Durable, waterproof, lightweight and portable tent.

  • A10 Bodypack Transmitter

    From

    $1,585.00

    Short description

    Digital wideband transmitter with simultaneous recording and transmitting for balanced mics and line-level inputs. 

  • A10 Dual Diversity Receiver

    From

    $2,695.00

    Short description

    Digital wideband receiver with dual XLR input and Hirose4 power cable.

  • A10 Dual Diversity Slot Receiver

    From

    $2,695.00

    Short description

    Digital wideband receiver with D­‐sub connector for universal and SuperSlot.

  • A10 Transmitter Belt Clip

    From

    $32.00

    Short description

    Replacement belt clip for A10 bodypack transmitter.

  • A10 Transmitter Boom Mounting Plate

    From

    $68.00

    Short description

    Accessory plate for mounting the A10-TX on a boom poles with a 3/8" threaded top screw.

  • A10 Transmitter Case

    From

    $30.00

    Short description

    Protective neoprene case for the A10-TX.

  • A10 Wireless Right-Angle Antenna

    From

    $30.00

    Short description

    Antenna with SMA connector for A10-RX and A10-TX.

  • A10 Wireless Straight Antenna

    From

    $28.00

    Short description

    Antenna with SMA connector for A10-RX and A10-TX.

  • A10 Zinc-Air 1.4V batteries

    From

    $6.40

    Short description

    For use with Phonak invisty, Comtek, and other in-ear receivers.

  • A10-RX Headphone Amplifier

    From

    $419.00

    Short description

    Converts an A10-RX receiver into a two channel headphone monitor.

  • A10/A20 Rack 4-Slot Wireless Receiver Enclosure

    From

    $1,562.50

    Short description

    Four-slot, eight-channel, Dante-enabled wireless enclosure compatible with the A10-RX, Sound Devices A20-RX, and most unislot and SuperSlot receivers.

  • A10/A20 Receiver Mounting Plate

    From

    $119.00

    Short description

    Replacement mounting plate for A10-RX and Sound Devices A20-RX with Universal/SuperSlot adapter.

  • A10/A20 Receiver Slot Adapter

    From

    $400.00

    Short description

    25 Pin D-­Type Universal/Superslot end plate for the A10-­RX or Sound Devices A20-Rx.

  • A10/A20 Receiver TA3 Adapter

    From

    $400.00

    Short description

    End plate for A10-RX or Sound Device A20-RX with dual panel-mount TA3 outputs, Hirose4 and TA4 power input, and USB-C for firmware update.

  • A10/A20 Receiver XLR Adapter

    From

    $400.00

    Short description

    End plate for A10-RX or Sound Device A20-RX with dual cable-mount XLR3 analog/AES outputs, Hirose4 male and female power inputs, and micro-USB for firmware update.

  • A120S

    From

    $29.75

    Short description

    No connectors. Requires soldering.

  • A15AS

    From

    $44.95

    Short description

    Can be set to 15, 20, or 25 dB. Passes phantom power

  • A15BT

    From

    $61.95

    Short description

    Used to connect balanced and unbalanced devices having different signal levels or impedances.

  • A15HP

    From

    $49.95

    Short description

    Helps to eliminate electrical and mechanical noise in an audio system such as 60Hz electrical hum from AC power lines, low-frequency rumble caused by wind noise or air conditioning system, and stage/floor noise transmitted to a microphone through the microphone stand

  • A15LA

    From

    $45.95

    Short description

    Converts balanced line level signals to microphone level (50dB attenuation)

  • A15PRS

    From

    $86.95

    Short description

    Reverses the phase (polarity) of a balanced audio signal. In line switch permits selection of normal or reversed polarity for comparison purposes.

  • A15RF

    From

    $55.95

    Short description

    RF filter, XLR in/out. Passes phantom power

  • A15TG

    From

    $124.95

    Short description

    700 Hz microphone-level signal

Pages