The MCR54 is a four-channel true diversity wireless microphone receiver system and this version comes bundled with a rear panel for use with Sony camera slots and your choice of four MTP40S or MTP41S bodypack transmitters or MTB40S plug-on transmitters in any combination.
The Sony End Plate allows MCR54 receivers to connect into Sony camera with internal double pins. Note: Not all Sony cameras have internal double pins. Check if your camera supports 2-channels with slot receivers.
Starting in 2017, the 617-652 MHz and 663-698 MHz frequencies are being transitioned by the Federal Communications Commission (FCC). Users of wireless microphone devices that operate in any portion of those frequencies must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC’s wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
[email protected] (212) 629-9430[email protected] (404) 855-2255