For a limited time, get Audio Limited A10 dual diversity receivers and A10 digital transmitters bundled together at a special price! Please note the options below and contact us to finalize your order:
The two-channel A10-RX receiver works with either one or two A10-TX transmitters. Its Advanced Digital Diversity System allows the A10-RX receiver to select the best signal between each channel's two receivers, combining the best digital packets from each receiver for lossless, wireless digital audio up to the absolute limits of operation. A-XLR end plates are included with a dual XLR input and a Hirose4 power connector for stand-alone operation in a production bag.
The A10-TX portable transmitter has a low-noise, high-dynamic-range analog 3-pin Lemo input that accepts signal from low-level lavalier microphones or balanced line-level. It also offers analog limiters and 5 volt bias for lavalier microphones, as well as 12 and 48 volt phantom power for balanced microphones. Available in any combination of Block A (470 - 548 MHz) or Block B (518 - 608 MHz) - please indicate choice in order comment field.
Some versions of this wireless microphone device may operate in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC’s wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
[email protected] (212) 629-9430[email protected] (404) 855-2255