Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Allows for quick and convenient testing and diagnosis of nine cable terminations, including XLR3, XLR5, 1/8" (3.5mm), 1/4", and Cat5 Ethernet.
Two-channel passive hum eliminator with dual ¼" and XLR inputs and outputs designed to eliminate 60Hz AC signal caused by ground loops.
Removes ground loop hum, mode noise & differentially induced hum in one device.
One foot cable for recording from an XLR mic on a mobile device. 3.5mm monitoring tap included
No connectors. Requires soldering.
Can be set to 15, 20, or 25 dB. Passes phantom power
Used to connect balanced and unbalanced devices having different signal levels or impedances.
Helps to eliminate electrical and mechanical noise in an audio system such as 60Hz electrical hum from AC power lines, low-frequency rumble caused by wind noise or air conditioning system, and stage/floor noise transmitted to a microphone through the microphone stand
Converts balanced line level signals to microphone level (50dB attenuation)
Reverses the phase (polarity) of a balanced audio signal. In line switch permits selection of normal or reversed polarity for comparison purposes.
RF filter, XLR in/out. Passes phantom power
700 Hz microphone-level signal
For padding high heels. Available in clear and black.
Set of four clear Lexan LCD screen protectors for the 702, 702T, 722, 744T, and 788T.
For 552, 664, MixPre, MixPre-D, or MP-2 tape output to 442/302 mix in.
Weighted attachment for lav connectors for easy wire dropping through clothes with interchangeable 3-Pin Lemo, Sennheiser, and Ta5F (Lectrosonics) adapters.
Weighted attachment for lav connectors for easy wire dropping through clothes.
Allows the Lav-Bullet, Lav-Rod, and Mic Drop blank models to be used with lavaliers featuring locking TA5/Mini XLR connectors, including many Lectrosonics' wirings.
Allows the Lav-Bullet, Lav-Rod, and Mic Drop blank models to be used with lavaliers with locking and push-pull 3-pin Lemo connectors.
Allows the Lav-Bullet, Lav-Rod, and Mic Drop blank models to be used with lavaliers wire for the Sennheiser G2/3 and other lavaliers with 1/8" locking stereo mini connectors.
Perfect for tricky wiring situations with tight clothing. Available in standard and foldable quick disconnect versions.
Flip mount for using a small tablet with an ENG audio bag.
Combines production and walkie talkie audio to a single headphone feed.
Combines production and walkie talkie audio into a single headphone feed with switchable walkie audio channels.
Non-lubricated latex condom used to protect electronic equipment from moisture.
2 inch wide, 15 foot long roll of velcro that includes both the hook and loop sides
Rounded rubber foam bumper suitable for any modern (post-1997) 6-section VdB boom pole.
Neoprene reversible belt with integrated pouch for single and double battery transmitters
Accepts a mic-level XLR and mic/line TA5 signal and maps them to push switches to create an instant intercom, full IFB, or talkback system, Available with XLR5M or two TA3M outputs.
