New Page 1
The UDR200C consists of two high performance, triple-conversion receivers operating simultaneously. The audio outputs of the receivers are blended in a ratio controlled by the comparative RF levels in the receivers. The multistage RF front-end is a unique design that is tuned by a microprocessor to the selected frequency. The RF and audio performance is extremely stable over a very wide temperature range, making the UDR200C perfectly suited to mounting in studio equipment racks.
The UDR200C receiver design combines the performance of a fixed frequency design with the frequency agility of a synthesized design to alleviate interference problems. There are 256 frequencies that are user selectable in 100kHz steps. As the frequency is changed, the front-end filters automatically retune to follow the operating frequency. Complete monitoring and control of the receiver is available from the control panel of the receiver or via remote computer control using the serial port and supplied LecNet software.
- 256 frequencies in 100kHz steps
- Pilot tone controlled squelch
- Opti-Blend Ratio Diversity reception
- Dual-band audio compandor
- Tri-mode dynamic noise reduction
- 10-segment LED indicators for RF and AUDIO levels
- -40dBu to +15dBu output levels
- Machined aluminum construction
- 19˛ half-rack configuration
- Universal 90-240 VAC power input
- External 11-17 VDC power input
- Software GUI with RF spectrum analyzer and walk-test recorder
Most users do not need a license to operate this wireless microphone system.
Nevertheless, operating this microphone system without a license is subject to
certain restrictions: The system may not cause harmful interference; it must
operate at a low power level (not in excess of 50 milliwatts); and it has no
protection from interference received from any other device. Purchasers should
also be aware that the FCC is currently evaluating use of wireless microphone
systems, and these rules are subject to change. For more information, call the
FCC at 1888CALLFCC (TTY: 1888TELLFCC) or
visit the FCC's wireless
microphone Web site.
If you're a licensed Part 74 operator, you may continue to use 50mW and greater
wireless systems under certain conditions. Eligible parties include a person or
organization engaged in the production or filming of motion pictures or
television, so, to the best of our knowledge, this includes below the line
More information on also can be found here.
To apply for a license, visit
If you have
any questions about these usage restrictions, please give us a call at
1-866-GOTHAM-8 or e-mail