|
Untitled Document
Only one tenth of an inch (2.5mm) in diameter, the B6
outperforms microphones many times its size. The B6
features replaceable protective caps that can change its
color and frequency response to match your application.
Designed to survive, it’s highly resistant to moisture,
makeup, and other hazards found in a production
environment. Available in white, black, and light beige colors with carrying case, tie clip, wind screen
and set of 3 protective caps.
Features:
- Easily Hidden
Smaller than the cable of other lavaliers, the B6 is
effectively hidden when it’s in plain sight. For example,
choose a protective cap near the color of a shirt and
poke the B6 out through a button hole. Tape the cable to
the back of the shirt to secure it and you're done.
Say goodbye to the hassle and degraded sound quality
you get burying mikes under clothing!
- Makeup and Sweat Resistant
Built to withstand perspiration and makeup. The B6 will
even survive an overnight soak in your favorite cola
beverage! The outer screen in the B6’s replaceable cap
stops makeup and sweat before it enters the mike
element. If it clogs, you can simply remove the cap for
cleaning or replacement.
| Compatibility: |
Designed to operate with any
wireless transmitter that can supply
microphone power. |
| Directional Pattern: |
Omnidirectional |
| Frequency Response: |
30Hz to 20kHz +- 3dB (flat cap) |
| Sensitivity (10k ohm load): |
6mV/Pa for P/N B6W4FF05xxx
2mV/Pa for P/N B6W5FF05xxx |
| Equivalent Acoustic Noise: |
24dB SPL A-Wt. (6mV/Pa mike)
29dB SPL A-Wt. (2mV/Pa mike) |
| Maximum Sound Pressure: |
118 dB (6mV/Pa mike)
128 dB (2mV/Pa mike |
| Power Requirements: |
1.5 to 3.5 volts under load@ 325uA |
| Output Impedance: |
2k ohms |
| Output Connector: |
To match transmitter or pigtails |
| Dimensions: |
1" x .15" (2.5mm x 3.8mm) |
| Weight: |
.002 oz (.06 g) |
| Supplied Accessories: |
Carrying case, tie clip, wind screen
and set of 3 protective caps. |
|
){kind=link}